Hey Guys,
I know there are so many variables that will ultimately affect rear end set up so there is no one definitive answer but hoped for some advice from anyone that has something similar and maybe through trial and error gives best all round launches at the drag strip.......
What I have is an all steel 57 Oval,stripped of interior but has 6 point cro-moly cage tied to frame forks and shock towers.I have 28mm torsion bars and Heavy Duty spring plates and urethane bushes.Koni Red shocks are currently set to maximum but I have tried backing off too and can't seem to notice any real difference from a launch perspective

Tyre wise just started using MH DOT's and had no idea what pressure these should be run at.I started at stock pressure / 26 psi and had really bad tramp.Some guys at the track suggested this was due to excessive pressure and I should be running MH DOT's between 11- 15 psi max.I did lower the pressures to 18psi and coupled with a longer smokier burnout the tyres were sticky and I had no tramp - whether this was due to smoky burnout / sticky tyre or pressure drop or combination of both I have no idea.
Any advice and thoughts from you guys that have proved what works at the track would be much appreciated.

Thanks,Shane.