36hp Mods
RichardinNZ:
I've currently removed the 36hp from the '58 and will be removing the heads to replace the pushrod tubes/seals etc to get on top of the oil leaks. I will be adding dual 28PCI carbs on Express manifolds and an 019 distributor.
I've also asked this on theSamba Vintage Speed forum, but thought it would also be good to see what people think here. Are there any simple modifications that a novice (ME) could attempt to take advantage of having the carbs?
It is still single port...
Thanks
Richard
Zach Gomulka:
Can't get it in if you can't get it out, so get a free flowing exhaust. And since you've got the heads off, a valve job and a flycut for more compression will really help. Just make sure your bottom end is sound.
RichardinNZ:
Hi Zach
Need to stick with the stock exhaust for now (cost) so have fitted so big bore unbaffled tailpipes to make it flow more easily. I will see if I can find someone who can flycut the heads.
Thanks
Richard
Black Sheep:
Rich engine bhp is mainly made in good flowing heads , any head work you undertake will be strangled by a stock muffler , dig deep buddy and find a merged header for that 36 er ;)
RichardinNZ:
Glenn, yes one day but according to the 1950s book 'Souping the Volkswagen' even pulling the baffle from a stock tailpipe can make a huge difference!
Hope all is good with you.
Richard
Navigation
[0] Message Index
[#] Next page