The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
June 29, 2024, 14:09:03 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
350869 Posts in 28606 Topics by 6827 Members
Latest Member: bmwjaguare5
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  Jamar Ali beam, any good?		 « previous next »
Pages: [1] Print
Author Topic: Jamar Ali beam, any good?  (Read 3867 times)
leec
Hero Member
*****
Posts: 2594
« on: November 15, 2012, 21:16:37 pm »
Hi Guys,

Looking for any real life experience with a Jamar linkpin Ali front beam.
Do they save a lot of weight? Do they handle as well as a steel beam? (Flex)

Any other info would be great....

Lee
Logged
benssp
Hero Member
*****
Posts: 1655


www.callookvw.com


WWW
« Reply #1 on: November 15, 2012, 21:43:21 pm »
Pete Shattock, Andy Marriot & Lucas all use them on the street. Pete & Phil have them therefore they must be a weight saving! :d
Logged
www.vwheritage.com  My Job
www.bernardnewbury.co.uk My Team
any work related enquiries to ben@vwheritage.com PM's about work will not be answered Cheesy

Bitburg Motor Boat Club Founder Member

YMCA
leec
Hero Member
*****
Posts: 2594
« Reply #2 on: November 15, 2012, 22:19:59 pm »
Quote from: benssp on November 15, 2012, 21:43:21 pm
Pete Shattock, Andy Marriot & Lucas all use them on the street. Pete & Phil have them therefore they must be a weight saving! :d

Hi Ben,
Knew a few outlaws ran them, just wondered what they were like out the box or whether they needed work to improve them.
Lee
Logged
Peter Shattock
Sr. Member
****
Posts: 353
« Reply #3 on: November 16, 2012, 11:32:56 am »
Hi Lee, there is a weight saving Phil will know how much...

There are also a few things to watch out for too.

The bushes in the beam don't fit the arms very well and you might like to consider making new ones. Paul Woodhead has the material you need.
Be careful not to over tighten the steering box as it will prevent that arm from moving freely.
If you run castor shims you will need to make new blocks to attach the beam with holes at the right angle.

The weight saving is good but needless to say its at the wrong end of the car so you might like to put something like the battery up front to get the weight where you want it.

Mine is narrowed 50mm so it was tight on the inner wings but I've used incerts in the beam tower so there is no need for a nut on the back which has been trouble free.

Peter
Peter
Otherwise I've had no problems with them on the street.
« Last Edit: November 16, 2012, 23:23:16 pm by Peter Shattock » Logged
The fastest beetle in the village
leec
Hero Member
*****
Posts: 2594
« Reply #4 on: November 17, 2012, 20:25:57 pm »
Hi Peter,

Thanks for the reply. Seems there's a little bit of work to do on them. May look at other ways to save a few kg's...

Lee
Logged
dannyboy
Hero Member
*****
Posts: 1169
« Reply #5 on: November 17, 2012, 20:31:40 pm »
Quote from: leec on November 17, 2012, 20:25:57 pm
Hi Peter,

Thanks for the reply. Seems there's a little bit of work to do on them. May look at other ways to save a few kg's...

Lee
add nitrous  Wink
Logged
8.77@156.8mph 
O/FF 60
......
leec
Hero Member
*****
Posts: 2594
« Reply #6 on: November 17, 2012, 21:43:09 pm »
Watching your great progress got me thinking bout it, but I'm stubborn and like normally aspirated John Maher style Smiley
Logged
dannyboy
Hero Member
*****
Posts: 1169
« Reply #7 on: November 17, 2012, 23:40:09 pm »
Quote from: leec on November 17, 2012, 21:43:09 pm
Watching your great progress got me thinking bout it, but I'm stubborn and like normally aspirated John Maher style Smiley
lol i dont have the patience Cheesy lifes too short for messing around na syley  Shocked Wink
Logged
8.77@156.8mph 
O/FF 60
......
Jason Foster
Hero Member
*****
Posts: 1255


7.69 87mph 12.35 106 mph


WWW
« Reply #8 on: November 18, 2012, 18:04:39 pm »
We ran one for a season on Daniel Kurtzmans super gas car. It cracked twice so steel went back on.
Logged
STRENGTH THROUGH JOY...........

Der Kleiner Panzers
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!