Cal Look engine pictures!
Jon:
Quote from: fast54vw on October 03, 2006, 06:35:40 am
Quote from: BeetleBug on September 18, 2006, 07:41:43 am
Looking good fast54vw!
That wrinkle paint, is it from a rattle can? If so, may I ask which one?
Best rgs
BeetleBug
it is actually powdercoat.
here is is finished (well almost)
Wow, that’s a good looking engine, I really like how low those IDAs sit! Modified or "of the shelf" intake manifolds?
I can't get really short intakes for my CE heads, so I'm cutting them down. How does it change the engine characteristics?
H67bug:
antique silver.. needs new trekker shroud if anyone had one??- pretty please :)
2332
Comp eliminator heads
48's
fk89
Berg 5
JS:
Finally my own engine ready!
2276, fk8, original NOS italians, reworked original heads, 6V Bosch 050 ingition. 14,31@146km/t first go @ Mantorp Park, Sweden.
Sorry for the 900 fingerprints ;D
Alan Uyeno:
Heres a current snap shot of my motor this year. I'm praying I'm gonna get consistant 11's with my pumpgas ride.
Shubee2 (DSK):
Quote from: fast54vw on October 03, 2006, 06:37:51 am
Quote from: BABOON on September 20, 2006, 23:30:08 pm
I bought my wrinkle finish spray can from my lokal Harley Davidson dealer. Don`t get surprised if it doesn`t work right away. Wait about 24 hours before the wrinkle treatment is done after the spray
here is the tip with wrinkle paint
spray the part heavy but no so heavy that it runs
wait about 1-2 minutes max and spray another (2nd) coat
the heavier the 2nd coat the more wrinkle you will get
Heres another tip if you want it to come out even say if you doing a big part I use a Hair Dryer to warm up the Part First then Spray a Heavy even Coat of paint wait 1 or 2 minutes then Spray it again the more paint you put on the heavier the wrinkle after paint has set about 20 mins on the part I go over it again with hair dryer it will start wrinkling and you can see if you need to recoat any flat or thin spots When I worked at Auto Haus They had a Building used just for packaging Auto Haus,Race Trim and Auto Gear Products they use to Spray all the Race Trim Stuff and then they Baked it in an oven in the Later years of Auto Haus they Stopped Painting all the Race Trim Parts Manifolds,Valve Covers,Breather Boxes,Sump were all Sold and Packaged Bare.
Navigation
[0] Message Index
[#] Next page
[*] Previous page