Any pics of a CSP Heaterbox Python on a Beetle?

(1/3) > >>

gkeeton@zbzoom.net:
I did a quick search, and only found some pics from Jim Ratto, and Sepi, but neither were what I was really looking for. Anyone have any rear, side, or ground level pics of one of CSP’s Python Exhausts that incorporates the heaterboxes on a Beetle? Looking for a 1 5/8, and 1 3/4 heaterbox exhaust solution to gain ground clearance over a current “mondo/fatboy” style muffler with a header.

JezWest:
[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

The muffler is 215mm off the floor.
The loop on the left side header is 210m off the floor.
The bend in the middle is 195mm off the floor.

I used to run a mondo on here and I think I got about another 2 inches of ground clearance when I switched to the Python.

My car has stock rear ride height (205/70 R15 tyres) and 2" dropped front (155/70 R15 tyres).

Hope that helps.

gkeeton@zbzoom.net:
EXACTLY WHAT I WAS LOOKING FOR! ;D

The car I’m gathering info for is in Winter storage, but I’ll have to take some current measurements to compare. It is very similar in ride height in the rear with a 195/65 R15 tire, but lower in the front with an old skool 145/80 R15. Thank you VERY much for taking the time to take the pictures!

Andrew:
Anyone got a pic of the Python mounted with a Berg-style traction bar? I was wondering if the Python's silencer box would foul on the bar?

  thanks.

JezWest:
Quote from: gkeeton@zbzoom.net on February 17, 2019, 02:16:07 am

Thank you VERY much for taking the time to take the pictures!


Happy to help!

Navigation

[0] Message Index

[#] Next page