so here's the front wheels going on my '59........
![](http://i29.photobucket.com/albums/c260/jick-r/chatsworthdone064.jpg)
however....they are for the early ford spindles which are about 2" longer than the link pin vw ones,
so my options are.........1) completely remove & replace the spindle by welding on an early ford type....
or...2) extend the VW spindle by welding on a 2" end piece from a spare pair to give them enough length to fit through the wheel`s hub, and then machining them to suit the ford bearings....
obviously not something for me to try and do myself........any thoughts or advice welcome......
cheers.....jick