The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
April 28, 2025, 09:33:49 am

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351516 Posts in 28736 Topics by 6879 Members
Latest Member: Aaperi187
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Cal-look
| | |-+  26mm torsionbars		 « previous next »
Pages: [1] Print
Author Topic: 26mm torsionbars  (Read 3622 times)
wide-5
Newbie
*
Posts: 28
« on: February 11, 2009, 10:47:32 am »
Hey.
I'm about to convert to 26mm torsionbars in the rear of my 60 -1.
My question about this is, what's the preload on bars like this? Or do they have any preload at all?
Petter
Logged
vwtaiwan
Newbie
*
Posts: 41
« Reply #1 on: February 11, 2009, 10:53:46 am »
Quote from: wide-5 on February 11, 2009, 10:47:32 am
Hey.
I'm about to convert to 26mm torsionbars in the rear of my 60 -1.
My question about this is, what's the preload on bars like this? Or do they have any preload at all?
Petter

I installed 30mm torsion bars on 56 bug with stock weight, and the bars just change 2 degree when put on the ground. 
Logged
BeetleBug
Hero Member
*****
Posts: 2836


Snabba grabben...
« Reply #2 on: February 11, 2009, 12:09:11 pm »
I`m afraid you have to try to find out. I have 28 mm and do not have any preload at all, still a bit to high. Some recommend 1/4" above the stop and I will try that later.

Best rgs
BB
Logged
10.41 - 100ci - 1641ccm - 400hp
Harry/FDK
Hero Member
*****
Posts: 3613


Every Rule Was Made To Break, Even Callook...
« Reply #3 on: February 11, 2009, 19:43:01 pm »
I went to 26 mm on my Mex, and had to go one spline lower to get to standard height.
Logged
Done ? Not Yet.
Ron Greiner
Jr. Member
**
Posts: 61


DKP II
« Reply #4 on: February 13, 2009, 01:26:47 am »
I put 26 mm bars into my 68 bug and set the pre load @ 11 degrees on left side and
10 degrees on right side.
if they are new bars you will have to reset them after a while.
Logged
wide-5
Newbie
*
Posts: 28
« Reply #5 on: February 13, 2009, 10:10:30 am »
Great answers.. Smiley
Thank you guys.
Petter.
Logged
wide-5
Newbie
*
Posts: 28
« Reply #6 on: February 22, 2009, 23:05:11 pm »
Something went wrong with my order, so i got a set of 28mm instead..
No worries about that.. I'm just happy.  Grin
So then I try this 1/4" over the stop theory.
Thanks again..
Petter
Logged
BeetleBug
Hero Member
*****
Posts: 2836


Snabba grabben...
« Reply #7 on: February 23, 2009, 09:05:35 am »
Quote from: wide-5 on February 22, 2009, 23:05:11 pm
Something went wrong with my order, so i got a set of 28mm instead..
No worries about that.. I'm just happy.  Grin
So then I try this 1/4" over the stop theory.
Thanks again..
Petter

And you will find out that it will be close to perfect... in my eyes  Smiley
Logged
10.41 - 100ci - 1641ccm - 400hp
Jon
Administrator
Hero Member
*****
Posts: 3214


12,3@174km/t at Gardermoen 2008


WWW
« Reply #8 on: February 23, 2009, 09:20:28 am »
Are you racing the car? I have 28's on my car, installed with 0 preload, but I think that might be a mistake... the ride height is perfect but it still squats to much on a glued track... I need to think about how to solve it.
Logged
Grumpy old men have signatures like this.
wide-5
Newbie
*
Posts: 28
« Reply #9 on: February 23, 2009, 21:55:26 pm »
In the moment i'm just prepairing my ride to join the race later.  Wink
The engine i have, is just a mild mod 1600. So it's not much of a racer..  Cheesy
But later i hope to get a more powerfull engine, and start racing a bit..
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!