Straight muffler solution for 2" header

[gator_push]

Hi there,
looking for a short muffler connecting straight to the 2" A1 header. Basically a short stinger style exhaust with muffler capabilities. I am not looking for a solution where a standard aftermarket muffler is welded to a pipe on a flange because of the exposure to the back.

Are there any companies out there making such race exhaust systems?

[John Palmer]

We run a A-1 sidewinder system that Tiger made with a custom muffler.  The Sidewinder system is standard, but the muffler (actually two different sizes) is quick realease mounted with a stainless V-Band clamp.  Just past the stainless clamp, the collector was made with "different sized" venturi cones before going into a bullet "straight through" muffler.  The muffler exits straight out the side, just past the right rear tire.  It's been on the car for the last four seasons and works flawlessly.  We have never needed to used the small collector/muffler, because the car has always had good low end performance.  Although this system was built as a "track legal" muffler system, it would also work well on the street.  It tucks up under the car nicely, and does not drag when the car is loaded on the trailer, or during wheelies, lol.

[kingsburgphil]

Hi there,
looking for a short muffler connecting straight to the 2" A1 header. Basically a short stinger style exhaust with muffler capabilities. I am not looking for a solution where a standard aftermarket muffler is welded to a pipe on a flange because of the exposure to the back.

Are there any companies out there making such race exhaust systems?

I'm not sure of exactly of what you're looking for. Both of these examples are from A-1. My best advice ..give Tiger a call 

[Troy Palmer]

The Bullet John spoke of above is currenty on ebay.
Thanks
Troy (AKA- empijones)

[fredy66]

Hi there,
looking for a short muffler connecting straight to the 2" A1 header. Basically a short stinger style exhaust with muffler capabilities. I am not looking for a solution where a standard aftermarket muffler is welded to a pipe on a flange because of the exposure to the back.

Are there any companies out there making such race exhaust systems?

I'm not sure of exactly of what you're looking for. Both of these examples are from A-1. My best advice ..give Tiger a call 

nice car

[gator_push]

The Bullet John spoke of above is currenty on ebay.
Thanks
Troy (AKA- empijones)

Troy,
thanks for this information. I browsed on ebay, there are actually a couple of bullet-style mufflers. Can you post a link?
Thanks,
Peter

[Lids]

The Bullet John spoke of above is currenty on ebay.
Thanks
Troy (AKA- empijones)

Troy,
thanks for this information. I browsed on ebay, there are actually a couple of bullet-style mufflers. Can you post a link?
Thanks,
Peter

do a seller search on ebay.com for empijones and you will fine it.

[.]

Here you go !
http://www.ebay.com/itm/Vintage-Cal-Look-Aircooled-NOS-VW-Racing-street-A-1-Muffler-v-band-bullet-empi-/110798452610?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item19cc1a3782

[Udo]

http://www.burnsstainless.com/

These are nice ones 

Udo

[gator_push]

http://www.burnsstainless.com/

These are nice ones 

Udo

Indeed. Which size do you recommend Udo?

[Udo]

Next year you have enough power , so you do not have to look for the weight 

I think 3" is ok , but i have someone who changes a stinger  to a muffler , i will try this . i need another one too next year because i can not run the 2 mufflers with wheeliebars

Udo

[gator_push]

Next year you have enough power , so you do not have to look for the weight 

So be it.