The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
May 05, 2024, 09:03:05 am

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
350704 Posts in 28580 Topics by 6823 Members
Latest Member: Riisager
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  Thread Sealant
« previous next »
Pages: [1] Print
Author Topic: Thread Sealant  (Read 2378 times)
DKK Ted
DKK
Hero Member
*****
Posts: 1879



« on: September 26, 2013, 05:39:14 am »

Just a simple question, what is everybody using for thread sealant for senders on the case? Besides tape. With tape can over tighten and crack the case.

Ted
Logged


VW Classic 2012
richie
Hero Member
*****
Posts: 5621



« Reply #1 on: September 26, 2013, 08:32:40 am »

Hi Ted

Loctite red or blue, don't know the part numbers from memory and am away at the moment, maybe 577?

cheers Richie
Logged

Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
Rocket Ron
Hero Member
*****
Posts: 2861


It's old school for a reason


« Reply #2 on: September 26, 2013, 08:50:11 am »

I use a sealant I get from the local hydraulic pipe suppliers. Works a treat and never had a leak at any joint when using it

The bottle has a bellows moulded in to the body of it so it's really easy to apply as you can "pipe" onto the joint

I'll get out in the garage and have a look later.

Regards Ron 
Logged

13.12 @ 101.84

Grooving out on life

You can't polish a turd but you can roll it in glitter
DWL_Puavo
Full Member
***
Posts: 104


« Reply #3 on: September 26, 2013, 09:01:45 am »

The picture above reminded me of another problem I had - full-flow inlet rarely tightens up in the just the right angle. With stiff steel-braided hoses, I had to use a small support brace (just a 90 degrees bracket with bolt and 2 nuts bolted onto crankcase's T2 support inlet) to support the inlet hose that it won't crack the hydraulic sealer and come loose & spill oil.
Logged
ibg
Full Member
***
Posts: 136


« Reply #4 on: September 26, 2013, 13:13:04 pm »

Loctite make at least 3 tapered thread sealants:
565 higher strength, up to 150C.
567   low strength, higher temp resistance and more Teflon so there is less galling for stainless/aluminium, slow cure. up to 200C. 
Don’t use much, you don’t want Teflon in the oil system.
577 med strength good for SS and coarse threads, fast cure, up to 150C. 11NM Mexx Likes this one
I use the 567.
the red and blue are regular nut and stud lockers and can be used too.
Logged
MeXX
Hero Member
*****
Posts: 526


World record holder 8.733 @ 255.658


« Reply #5 on: September 26, 2013, 14:00:05 pm »

Loctite make at least 3 tapered thread sealants:
565 higher strength, up to 150C.
567   low strength, higher temp resistance and more Teflon so there is less galling for stainless/aluminium, slow cure. up to 200C. 
Don’t use much, you don’t want Teflon in the oil system.
577 med strength good for SS and coarse threads, fast cure, up to 150C. 11NM Mexx Likes this one
I use the 567.
the red and blue are regular nut and stud lockers and can be used too.


Hi

On this small (M10x1) threat combined with a bulky sensor I prefere med to high strenght.
577 or even loctide red threat locker.

MeXX

Logged

Drag or Die
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!