|
Title: Stick with the C35 or change the cam/go bigger Post by: 2085 72 gtbug on May 20, 2017, 19:57:40 pm OK guys I have all this lot ready to go together
The crank flywheel rods pistons pully and clutch are due out of the balancers on Tuesday Case and barrels are being machined at the moment so with the spec listed am I under cam specced a little As 41 dual relief case Cb 74 crank 12lb flywheel Kennedy stage 2 Dainken disc Berg steel front pulley Scat straight cuts 94 mahle non strokers 5.4 rods Cb street elims 42/37 125 scat rockers Big beef manifolds 48 idfs Cb magna spark dizzy coil leads etc Speed shop merged header and muffler As I said I've got a scat c35cam kit lifters and springs to go with it but abouta week to change it if needs be Thoughts please fellas Cheers Chris Title: Re: Stick with the C35 or change the cam/go bigger Post by: mikko k on May 21, 2017, 07:36:47 am For street bug? Go bigger. In my opinion.
Title: Re: Stick with the C35 or change the cam/go bigger Post by: 2085 72 gtbug on May 21, 2017, 08:10:14 am For street bug? Go bigger. In my opinion. Sorry kiddo Yep for mostly street use the car is full weight (day moulding wings t bars etc) And need it built run in and ready for the cal look drags in 8 weeks 😂 Title: Re: Stick with the C35 or change the cam/go bigger Post by: richie on May 21, 2017, 08:40:00 am Hi Chris
are heads ported? if so do you know by who? and how much/what port shape? engine warrants something bigger but only if heads will make use of it cheers Richie Title: Re: Stick with the C35 or change the cam/go bigger Post by: Torben Alstrup on May 21, 2017, 09:55:16 am Web 121/125. Maybe advance the cam 2 degrees. 10-1 CR
Title: Re: Stick with the C35 or change the cam/go bigger Post by: 2085 72 gtbug on May 21, 2017, 12:17:17 pm Hi Chris Hi Rich are heads ported? if so do you know by who? and how much/what port shape? engine warrants something bigger but only if heads will make use of it cheers Richie I had the heads off here so don't know the history I will take some pictures this week and ping you an email I was thinking only a c45 ish anyway I'm thinking let it get built enjoy the car for a few weeks and drag day c how it plays out then get some opinions over the weekend.... Cheers Chris Title: Re: Stick with the C35 or change the cam/go bigger Post by: Zach Gomulka on May 21, 2017, 18:45:51 pm C45 at a minimum.
Title: Re: Stick with the C35 or change the cam/go bigger Post by: UltraOrange67-2443 on May 22, 2017, 19:26:06 pm Webcam make some nice stuff
The heads are nicely ported and valve size is good. Make use of the 48's ;D |