Here's my sender

I need to double check that in morning to be sure

I haven't used one of those in sump, when i used vdo it was the dual temp and pressure sender in stock pressure location

ritchie it seems that the vdo temp senders is M10 x 1

here you go Richie, I took the measurement above the thread (16,9mm) and between the thread (15,6mm)

Yep that should work, can you measure outside of plug that's in sump right now? to confirm it is what i expect it to be

cheers Richie

this one?
1/4'' NPT male to 1/8'' NPT female
or here in belgium the sender can be in metric? so i will take 1/4npt female to  M10 male if avaible

thx richie ..appreciate your help

Hi Fabs, it will be npt, most temp senders are 1/8th npt but usually the sump has different size like 1/4npt so you need an adaptor to fit it

cheers Richie

hi guys , i need your help , i would put an oil temperature sender  in my racetrim  oil sump
but i don't know  the threads , should I use as metric or NPT?  for the guy who worked  at auto haus do you remember ,
i can not remove the bolt as there some oil in the sump and case
thanks for you help
it's a little bit hurry