|
Title: Pauter pumps Post by: Andy Sykes on February 15, 2014, 19:38:22 pm Hi quick question I'm guessing the ports on the left are suction and the ones on the right are pressure
(http://i71.photobucket.com/albums/i149/gluemixer/garys%20picnic%202010/4EE63A92-DE64-453A-BBB2-5EBC68018520_zps2yd8xlp8.jpg) (http://s71.photobucket.com/user/gluemixer/media/garys%20picnic%202010/4EE63A92-DE64-453A-BBB2-5EBC68018520_zps2yd8xlp8.jpg.html) So that's three scavenge, one oil feed from dry sump, one return and oil pressure to engine. Andy would you feed the bypass from the filter to the sump or straight into the pump scavenge ? Cheers Andy Title: Re: Pauter pumps Post by: russ fellows on February 15, 2014, 20:49:40 pm Yes that's right. The first three stages are scavenge two from the sump one from the rocker cover of 4 end. The last is pressure. I return my bypass above the scavenge on the rocker cover
Title: Re: Pauter pumps Post by: Andy Sykes on February 15, 2014, 20:52:32 pm Ok thanks Russ :)
Title: Re: Pauter pumps Post by: spoolin70 on February 16, 2014, 19:00:43 pm Hi Andy
Did you get your pump direct from Pauter or from another source ? I've been looking for a used 4 stage for aaaaaages with no luck. Thanks Darren Title: Re: Pauter pumps Post by: Andy Sykes on February 16, 2014, 19:53:59 pm Hi yes direct from pauter with the motor
Title: Re: Pauter pumps Post by: spoolin70 on February 16, 2014, 20:08:33 pm Cheers Andy
Good luck with the build, always look forward to an update on your build thread. Thanks Darren |