The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
May 06, 2024, 12:58:36 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
350712 Posts in 28581 Topics by 6823 Members
Latest Member: Riisager
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Technical stuff
| | |-+  Stock engine help!		 « previous next »
Pages: [1] Print
Author Topic: Stock engine help!  (Read 4083 times)
beetletom
Hero Member
*****
Posts: 1686
« on: July 19, 2016, 20:02:21 pm »
Am looking after a 1302 for a friend, the car got rear ended a few months back, but is now repaired...

But ever since, the engine has been running extremely hot!!

In the shunt, the engine and box was pushed forward.

The only visible damage, was the lower pulley ever so slightly warped
Exhaust and front tin.

The engine itself runs and turns over fine (no tight spots)
Thermostat flaps are fine


Timing has been checked by 3 people! Valve gaps set correctly etc

Before the incident,the temperature was fine

Could it be internal??
Logged
Jim Ratto
Hero Member
*****
Posts: 7121
« Reply #1 on: July 19, 2016, 20:15:51 pm »
Is the opening for the fan (front of shroud) shoved right up against firewall tarboard now? You mentioned the engine got pushed forward.... check this.
Logged
beetletom
Hero Member
*****
Posts: 1686
« Reply #2 on: July 19, 2016, 20:21:43 pm »
Nope, all fine, nothing blocking the fan
Logged
Jim Ratto
Hero Member
*****
Posts: 7121
« Reply #3 on: July 19, 2016, 22:10:49 pm »
Quote from: beetletom on July 19, 2016, 20:21:43 pm
Nope, all fine, nothing blocking the fan

I would then suspect muffler is distorted inside, creating huge backpressure. Years ago we would make the stock engine run cooler by driving an awl into the "X" shaped restrictors in Leiststritz stock 113251053AK mufflers
If the muffler got hit, I would try another muffler and check to make sure nothing took a blow which kinked forward piping (heat exchangers) or the way the heat exchanger meets muffler.
I'd make sure the lower tins didn't get bashed hard enough to restrict hot air exiting from off engine too.

Logged
beetletom
Hero Member
*****
Posts: 1686
« Reply #4 on: July 19, 2016, 22:58:17 pm »
Stock muffler was damaged from the accident

So have fitted a empi Gt 2 tip dog turd muffler, which was on my 66

Every thing that should resolve the problem, isn't?!?

Next step is to change the oil cooler...?

It gets hot quite quickly ( 10 minute journey)
Logged
modnrod
Hero Member
*****
Posts: 795


Old School Volksies
« Reply #5 on: July 20, 2016, 06:25:15 am »
If it was sitting for a few months, then is it possible the oil cooler valve is stuck due to varnish from old oil?
Logged
beetletom
Hero Member
*****
Posts: 1686
« Reply #6 on: July 20, 2016, 08:17:41 am »
Will have a look, once I Change the cooler
Where is the valve located?
Logged
modnrod
Hero Member
*****
Posts: 795


Old School Volksies
« Reply #7 on: July 20, 2016, 10:41:02 am »
Oil pressure relief valve (pulley end)......

https://www.google.com.au/search?q=vw+oil+relief+valve&client=safari&channel=mac_bm&biw=1280&bih=739&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwj6pIWw34HOAhUGspQKHdmVAGEQsAQIIQ

Sometimes happens from sitting around.
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!