|
Title: Scat flange crank flywheel bolt Q Post by: RMS Boxer Service on March 13, 2010, 19:04:19 pm Hi
I need to know the lenght of the flywheel bolts for a Scat flange crank. It's a 8 bolt crank. I got some but the threads are only 0.725" long and that's seems too short to me, but I might be wrong. The threads are app 19 mm deep into to crank and the flwheel bolts only goes 9 mm into the crank threads, not enough in my opinions. What bolt lenght are are you using on your Scat crank?? /Rolf Title: Re: Scat flange crank flywheel bolt Q Post by: dangerous on March 14, 2010, 23:12:46 pm There is not a lot of room to put a deep thread.
You need to wind in a bolt by hand, and measure the remaining gap unde the head. It is important that it actually clamps the flywheel against the face. |