94mm pistons 1.300 crown 1 or more damaged used etc. anything considered.

[Phil West]

Hi I'm after 1,2,3 or 4 of 1.300 crown height pistons to be used for mocking up to sort my required notches on a new set.

Everything considered!  Broken, damaged, missing pin, over notched, bodged, cracked.

Ideal would be an old 1 (or more) JE piston with huge notches.  But without notches would still be useful.

Cheers
Phil

[Udo]

I have a set of strong JE with big notches . have to look for the comp. height
Can post pictures tomorrow

Udo

[Phil West]

 

[Udo]

[ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ]

comp.height is 35mm , come with 4 pin keeper per piston - like the Bergs recommened some years ago :-)

Udo

[Phil West]

Hi Udo,

Unfortunately I need a 33mm comp. height for setting up my motor but thanks for looking I appreciate it.  I've got a 35mm height old Wiseco set here and may have to mill off 2mm to get them right for mock up if I can't locate any of the 33mm.

Cheers
Phil

[Udo]

No problem Phil .These can get cut off 2 mm too. And i have a set of new mahle cylinders for them - so if any body needs them call me

Udo