[ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ]
I'm selling my selfmade Throttle body stealth kit. The Webers are bored to 50mm diameter. as the body is too thin over the the 50mm, it is bored to 47mm. 47mm is nearly the same area as 50mm with shaft. You can drive every Bosch EV14 fuel injectors you want. The bodys worked really well and made 258ps out of my 2811 TF1 engine with MS 230 heads. The Flow is more then 245cfm @ 25. The synchronizing screws are working, the rest of the Carburetor is not there anymore.
International buyers are welcome. What you see in the pix is what you get.
1200€ + shipping
[ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ]
Great, we need more posts like this and I can relate to the fact your son wants to shim in with some "marvelous" ideas like the Lambo seats... haha, I had a few of the same conversations with my boys in the garage. Thx Rob, make the lounge great again!
Having arrived home a day early I decided to get the motor out of the car the following day to check the clutch. It looks like the pressure plate has gone south not entirely sure why yet, but I’m working on that and have a plan to be out again at the end of July with a happy clutch and another change which I hope will help improve the cars performance a bit too. [ Attachment: You are not allowed to view attachments ]
The Cal-look Lounge
