The Cal-look Lounge

Cal-look/High Performance => Pure racing => Topic started by: Lee.C on March 07, 2009, 20:21:04 pm



Title: but what about 356C disc brakes????
Post by: Lee.C on March 07, 2009, 20:21:04 pm
I have heard a rumor that you can also fit 356C disc brakes on a Beetle Front AND rear - I think the Ex Goss, Ex Fastbrit, Richie Choptop has them on the front  :-\

Is anyone else running them  ???

Has anyone got anything on this COOL old skool conversion  :)


Title: Re: but what about 356C disc brakes????
Post by: speedwell on March 07, 2009, 20:39:36 pm
mike from the das have them on his blue oval he 've 4 of them
i will see if i've a picture


Title: Re: but what about 356C disc brakes????
Post by: speedwell on March 07, 2009, 20:54:33 pm
sorry lee no pictures of the porsches disc  :-\ may be next week end if i see the carat freddy files  i will take picture


Title: Re: but what about 356C disc brakes????
Post by: ian c on March 08, 2009, 02:48:01 am
c was 5x130 , so the wide5 ercos wont fit .
or is that idea gone now ??


Title: Re: but what about 356C disc brakes????
Post by: Zach Gomulka on March 08, 2009, 03:37:11 am
They fit up front, just like a 356 drum. I think the rears require you to use the Porsche axle tubes as well??


Title: Re: but what about 356C disc brakes????
Post by: Shubee2 (DSK) on March 08, 2009, 03:54:59 am
They fit up front, just like a 356 drum. I think the rears require you to use the Porsche axle tubes as well??
The Porsche Alxe Tubes do not have Shock Mounts like the VW so it is either use the VW and make a claiper bracket or make a shock mount on the porsche ones,  the fronts only fit Link Pin front ends


Title: Re: but what about 356C disc brakes????
Post by: Lee.C on March 08, 2009, 15:09:55 pm
c was 5x130 , so the wide5 ercos wont fit .
or is that idea gone now ??

There are a million good ideas floating round my head at the moment dude - Thanks for the info thought guys  :)


Title: Re: but what about 356C disc brakes????
Post by: Lee.C on March 08, 2009, 21:18:55 pm
I've been looking around and the 356C set up seems VERY close to a 924 at the front at least and Early 944 at the back  :-\ Any thoughts ??? :)


Title: Re: but what about 356C disc brakes????
Post by: ESH on March 09, 2009, 20:38:37 pm
I know Cs work OK on the front.  :)


Title: Re: but what about 356C disc brakes????
Post by: Jim M on March 16, 2009, 05:53:07 am
I put C brakes on my car in '87. They worked great till i took then off yesterday.


Title: Re: but what about 356C disc brakes????
Post by: speedwell on March 16, 2009, 21:14:24 pm
lee i saw mike from das yesterday at the freddy files
the first i do was looking after the disc brake , and  i was suprise to see that mike removed those one
i ask him about the mods to do

no modification on the front they fit directly , but for the rear  you will pick up the swing axle and the swing axle tube from the porsche , and mike said that he has of make manufacture the swing axle at the level where the bearings comes ,  because that  didn't go correctly into its housing

and he said that the brakes don't give a good result with a big engine , that's why he removed those one

rgd
fabs