|
Title: My '56 Oval -- Project of Doom Post by: Fiatdude on September 24, 2009, 07:06:09 am Well -- -- it followed me home last week
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on September 24, 2009, 07:12:15 am Here is something I've got setting on the shelf -- might get it to fit
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on September 24, 2009, 07:16:06 am Today was the offical start of the project -- and was it expensive
down to JE for a new set of 4" pistons New set of Pauter roller rockers New Turbo New Electromotive Fuel injection system Anybody want to buy a 1835 -- or a set of 48 IDF's -- or an orginal set of Berg rockers (with a 1 stamped on the arms) bottom ones are some stockers I had laying around Title: Re: My '56 Oval -- Project of Doom Post by: ian c on September 24, 2009, 14:05:53 pm looks like a nice little project !!
Title: Re: My '56 Oval -- Project of Doom Post by: 71CALRIPPER on September 24, 2009, 14:20:40 pm Gasser ? ;)
Title: Re: My '56 Oval -- Project of Doom Post by: vwcab on September 24, 2009, 14:57:09 pm Gasser ? ;) with TURBO........................nah, ;DTitle: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on September 24, 2009, 15:56:17 pm Korvette Killer LOL --- just an average SoCal Street car -- gonna do a few shows --- Gotta start lining up some serious braking -- -- Anybody got some slightly used stuff laying around????
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on September 25, 2009, 03:25:56 am the project continues
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on September 28, 2009, 20:58:57 pm Here is the itty-bitty turbo I picked up -- as you can see a quarter will barely fit in the intake and the out is just a bit bigger than a dime -- The exhaust is slightly bigger than 1" square
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on October 01, 2009, 05:19:04 am Went by Racing Jason's today and picked up one of his welded fans -- -- very very nice
Met Ted by the side of the 605 Freeway and he bought my Berg Rockers -- Thanks Ted The throttle body is in the house The Electromotive FI is in the house The seimens injectors are in the mail The Total Seal Rings are in the mail OOOOHHHHHHHH -- touching all these parts is getting exciting Title: Re: My '56 Oval -- Project of Doom Post by: jamiep_jamiep on October 01, 2009, 08:58:15 am Can't wait to see this one together!
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on October 02, 2009, 04:25:31 am I want to give a shout out to my friend Allen Nimmo --This guy has had some very fast toys and owns Performance Techniques Turbos in San Bernardino (909) 824-1020 -- He has done everything from the drags to boats to the Salt -- He even has done R&D for Don Pauter in the years past. He has helped me with alot of input in getting this project off the ground. If you need any thing Turbo or Electromotive. He is your guy. Here are some pictures of his shop. the second is where all the oops end up LOL
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on October 05, 2009, 21:59:42 pm Throttle Body fresh off the Mill -- Nimmo did this for the project
Title: Re: My '56 Oval -- Project of Doom Post by: Lee.C on October 05, 2009, 23:20:49 pm Hmmmmm Very interesting ;)
I also noticed that the throttle body uses the same IAC (idle air control) valve as 1.2l corsa's! :D (for the americans its a VERY small compac car here in europe) Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on October 06, 2009, 00:57:14 am It is a GM TB off one of their V6 cars -- -- 50 mm
Title: Re: My '56 Oval -- Project of Doom Post by: Lee.C on October 06, 2009, 01:14:44 am It is a GM TB off one of their V6 cars -- -- 50 mm Yeah I should have said Vauxhall/GM/Opel/Holden its all the same ;) and yeah it would have been on the V6's too - Very interesting :) What Throttle Position switch you gonna use ??? Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on October 06, 2009, 06:31:30 am There is one mounted on there already -- first pic in line with shaft
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on October 09, 2009, 19:10:01 pm Well -- --After seing what Denham is doing to these angle port head I'd say my porting is quite mild, but here are the heads ready for reassembly
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on October 13, 2009, 15:56:43 pm Ever wonder just how much bigger a 4" bore is over a 92 mm -- well here is a picture
http://i586.photobucket.com/albums/ss306/Fiatdude/arpm002.jpg Title: Re: My '56 Oval -- Project of Doom Post by: jamiep_jamiep on October 13, 2009, 16:24:41 pm :o
Wow.... Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on November 10, 2009, 05:25:47 am Something new on the slab
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on November 10, 2009, 05:26:40 am Some new Aluminum intakes to mock up
\And this is an comparison of where the rings are located on the new pistons -- and yes the wrist pin location is in the oil ring on the new ones Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on November 13, 2009, 05:19:34 am Holy Crap -- -- This is one for the books -- --
Trying to get the compression down to 8.5 for the motor and with the dished pistons the .020 and .030 trims of the pistons actually increased the compression LOL Finally at .040 the compression was down to 8.6 to one -- close enough LOL Title: Re: My '56 Oval -- Project of Doom Post by: Dave Rosique on November 13, 2009, 06:18:59 am Looks good! Can't wait to see the car at the track ;D
BTW, nice Henry J 8) ~Dave Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on November 13, 2009, 06:41:14 am My Friend has owned the Henry since High School and now that he has RETIRED he feels it is time to get 'er done -- wants a 10 sec car to drive back and forth and race to the track in Fontana
He has a '56 F100 that does 12's Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on November 19, 2009, 00:48:56 am It's heart is getting ready to start beating
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on November 19, 2009, 21:18:13 pm more pictures
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on January 08, 2010, 03:06:45 am Ohhhhh Ohhhhh Ohhhh
Starting to get excited [attachment=1] Title: Re: My '56 Oval -- Project of Doom Post by: 58vw on January 09, 2010, 07:22:16 am is that thing done yet...hope your putin a bus box in that car ;D
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on January 09, 2010, 07:37:46 am Going is slow on it -- -- No bus until I break this TI then IRS bus setup -- -- can't really find a bus with the gearing I want though
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on April 16, 2010, 05:15:18 am been a while -- been doing a little -- Note to self: SELF, welding you header together outside and in a high wind is not a bright thing to do if you want a nice/pretty weld
[attachment=1] If ugly is fast -- -- this thing will be Super-sonic Title: Re: My '56 Oval -- Project of Doom Post by: Tony Wilkie on April 16, 2010, 20:38:07 pm Uh...you could have tack welded it and I could have tig welded it for you :-\
tw Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on April 16, 2010, 21:01:19 pm the coolant pump on mine is broke
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on May 23, 2010, 00:43:44 am finally got these today
[attachment=1] Title: This is Ovalholio Post by: Fiatdude on April 25, 2011, 05:48:13 am The engine going together
(http://i586.photobucket.com/albums/ss306/Fiatdude/pistonsandcylinders.jpg) (http://i586.photobucket.com/albums/ss306/Fiatdude/gettingclose.jpg) The engine in the car (http://i586.photobucket.com/albums/ss306/Fiatdude/2011-04-10_update.jpg) The wiring (http://i586.photobucket.com/albums/ss306/Fiatdude/2011-02-01_wiringharness.jpg) and Finally the engine is running http://www.youtube.com/watch?v=GHeSk9P3Ps0 Got a lot of tuning to do -- got to get it so that it will idle without die ing and then get it off the damn Jack stands where it has been for the last year and drive the damn thing Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on May 07, 2011, 17:42:13 pm Went down to Shear Speed in Escondido and was planning on putting it on the dyno -- After chasing a oil leak and then doing a lot of baseline tuning Bill found a vacuum leak in the intake below the TB ------ CHIT CHIT CHIT ----- so didn't get it on the rollers, but the car is diffently driveable -- Rolled into it behind Billy's place and came onto the boost for the first time -- those poor 165's didn't stand a chance LOL -- Can You say -- Y E A H B U D D Y --
(http://i586.photobucket.com/albums/ss306/Fiatdude/2011-05-05_16-18-23_66.jpg) I drove it to the local car show/ cruise last night for a little while -- drove it down with the apron and rear lid off, just to show it off, -- -- Boy it was loud LOL -- Got the interest of all the V8 guys -- Especially since it is only a 1300 hee hee Quote of the evening - "That 1300 won't even begin to spin THAT turbo up!!" LMAO Title: Re: My '56 Oval -- Project of Doom Post by: Peter on May 08, 2011, 12:08:03 pm Great that you're havin fun with it :)
Title: Re: My '56 Oval -- Project of Doom Post by: Pas on May 08, 2011, 21:16:02 pm I told you to get some fatter tyres while you were out big shoehorn shopping ;D
Not bad for a little 1300 ;) Title: Re: My '56 Oval -- Ovalholio - watch ur bunghole Post by: Fiatdude on May 10, 2011, 00:45:21 am Re-welded the entire intake today and added a splash of TurboSmart blue to it -- seemed to help the idle
http://www.youtube.com/watch?v=JJNaZRlCDPE Got to get it back down to Bill Shear's to finish the tune Title: Re: My '56 Oval -- Project of Doom Post by: Peter on May 10, 2011, 16:48:52 pm Cool Video Harold ;D
it makes me want to finish my motor sooo bad! you shoud replace your tranny mounts though :) Title: Re: My '56 Oval -- Ovalholio - watch ur bunghole Post by: volkskris on May 10, 2011, 17:50:38 pm added a splash of TurboSmart blue to it -- seemed to help the idle ;D ;D ;DTitle: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on May 14, 2011, 00:39:51 am Welllllll -- --- Is It a Sleeper???????
(http://i586.photobucket.com/albums/ss306/Fiatdude/100_4193.jpg) Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on May 26, 2011, 04:35:18 am Another chitty day at the dyno -- for some reason the pushrod tubes on the 1-2 started puking BAD -- Billy said "we can work through this" -- so we throw it onto the dyno and start making a few pulls each time adding more rpm and more fuel (it was a little lean LOL) and got it up to about 4500 rpm and 12-13 lbs boost and massaging the VE table to keep it "right" and on the last pull blew out a exhaust gasket on #1 cylinder -- -- CHIT CHIT CHIT CHIT -- -- -- Billy is thinking that the engine is growing so much that it is torquing the flanges and causing it to leak/blow out -- final results well over 300 HP and a few more to find as it gets fine tuned -- Bill thought we could of had it dialed-in within another hour if .. ... ....
As Always Bill at SHEAR SPEED Escondido CA is the man -- The Mad Tuner LMAO -- Next time I'll bring the 24 pack so we don't run out of Beer Title: Re: My '56 Oval -- Project of Doom Post by: javabug on May 26, 2011, 12:14:24 pm Welllllll -- --- Is It a Sleeper??????? That "Empi" sticker in the back window completely blows your cover! :) Title: Re: My '56 Oval -- Project of Doom Post by: 71CALRIPPER on May 26, 2011, 15:37:56 pm Stock wheels 100% sleeper ....
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on June 15, 2011, 04:51:10 am Well, The gas tank was almost empty from Nick's and tooling around a little here -- so went to the E85 store and bought 15 gallons at $3.53/gallon -- spent about 5-10 minutes redoing the last program I had for the car that was starting to get dialed in and basically added 40% more fuel to it. and then.. .. .. .. ...
http://www.youtube.com/watch?v=3ULcYUQ9HNc Diffidently too fat and probably need more timing as it was feeling lazy -- but it is a starting point........ Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on July 26, 2011, 12:09:10 pm Well there was a car show this weekend just around the corner from me at the Regional Park and my friend with the Allstate (Henry J) was entered in it -- So I thought I'd drive the Ultra Fat tuned Ovalholio over to support him. My piece drove real nice considering just how really fat it is tuned right now.
Now, let me say that there were some ultra cool rides there -- and here I am driving a Mega Pigged out primered Oval with greasy hand prints all over it -- and My Buddy just had to be parked all the way to the back under a tree...So I drove through the whole show idling with an occasional burp to keep it from totally loading up -- I get parked next to Jerry and no sooner than I shut the thing off, there must of been 10 guys right there wanting to see the engine ... .. I'm going HUH???? and I go Why??? One guy pops off and says, "Hell, Half the people at the show eyes are burning from the alcohol fumes coming off the exhaust." So I'm busting up and pop the hood -- -- -- One guy in the back says .. .." God Damn VW's ... I've got a 10 second car and everytime I race one of them I get my ass handed to me!!!" I'm LMAO. And I say it is just a stocker with a turbo on it. and he says, "Yeah, Right, and you can Bite Me Too. " -- -- Good Times Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on September 04, 2011, 01:13:53 am Lirking on a city street near you
(http://i586.photobucket.com/albums/ss306/Fiatdude/006.jpg) (http://i586.photobucket.com/albums/ss306/Fiatdude/007.jpg) (http://i586.photobucket.com/albums/ss306/Fiatdude/008.jpg) Title: Re: My '56 Oval -- Project of Doom Post by: leec on September 04, 2011, 13:11:45 pm Those last two pics are fantastic, paint it an og colour and dare i say it put trim on, that would fool a lot of people.
Great car, Lee Title: Re: My '56 Oval -- Project of Doom Post by: Richyrich on October 11, 2011, 07:10:02 am I just love your work, She is so cool. See what happens when a little Bug follows you home.. :D.
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on October 31, 2011, 02:22:37 am Freaking tire shake keeps causing parts to fall off -- Damn it
(http://i586.photobucket.com/albums/ss306/Fiatdude/tireshake.jpg) Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on February 05, 2012, 08:20:32 am Been working toooooo much -- which is good --- and not doing too much on the Oval -- which is bad --- I had a friend do some work on the car for me, new clutch cable, reworked all the pedal assembly, put in 28 mm torsion bars, some killer RLR shocks (those last two things seemed to help the tire shake a lot, -- probably gonna have to break down and do a cage in the car) -- but still can't get the damn thing to tune worth a chit -- had a guy over and we switched the injectors between the 60# and 160# ones I had about 6 times and still no luck -- seemed like the 60# ones just were not firing correctly and the 160# ones wouldn't fire at a fast/small enough rate when in batch fire mode and would start fluttering at idle and drownding the engine --- --- SOOOO -- Gonna work on the Ovalholio tomorrow -- slowly checking things off that could be screwing with me -- tomorrow, First changing the oil, then new KILLER plug wires (at least they almost killed me paying this much for a set of wires LMAO) and a NEW set of 100# injectors that I picked up this week ---
(http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-4591-1328408423967.jpg) (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-1745-1328408496671.jpg) They had some cool plugs that change the EV-6 (???? not sure on this number) plugs to EV-1's which I had on my car. that was one of the reasons I didn't want to change to a newer style of injectors was I was going to have to change the plugs on my harness. Problem solved. (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-2874-1328409054920.jpg) Title: Re: My '56 Oval -- Project of Doom Post by: Fasterbrit on February 05, 2012, 15:24:46 pm Hey Fiatdude, just clocked this post - looking good! Those n/a pistons you are running with deep valve pockets - how thick is the crown at its thinnest point? Looks like there's not much of a heat dam there for turbo use and high boost. Just a thought...
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on February 05, 2012, 20:20:09 pm They are custom JE 4" pistons made just for this project
Title: Re: My '56 Oval -- Project of Doom Post by: Fasterbrit on February 05, 2012, 22:16:38 pm Cool. Just out of interest, how come they needed such deep valve pockets with a low Cr? A customer's 4" motor I am building at the mo had JE pistons with a dish machined in the top to drop cr. Even just a 0.060" deep dish made the crown too thin in critical places for turbo use. I would be interested to know your crown thickness as the JE pistons you are using may well be thicker than his. cheers
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on February 23, 2012, 06:26:01 am UH OH -- I might be in real trouble now !!!!!!!!!!!!!!!!!!!!
(http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-3145-1329948111888.jpg) (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-5167-1329948142248.jpg) A 1936 Topolina --- She has been living here in Yucaipa for the past 50 years -- -- It was love at first sight --- but her Daddy is keeping us apart -- bastard won't sell her to me -- He has owned her for 35+ years Title: Re: My '56 Oval -- Project of Doom Post by: BeetleBug on February 23, 2012, 09:20:58 am Yo dude!
Get you`re oval finished and drive her hard before you start looking at other cars. Noticed your fuel problems. Did you contact Hirsch and if so what did they have to say to their defence? Lets see some pictures of your sleeper! Best rgs from Norway, -BB- Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on February 24, 2012, 21:05:00 pm Hey BB --
Man when this car is running, It is making some HP and it is just totally cool how it HAULS AZZ. But those times are just not often enough, and it is just because of weird little things -- the gremlins -- I never thought it would take me so long to get this thing sorted out. This thing has been 'running' for almost a year and it still isn't really RUNNING. I've fixxed one thing and then that fix has cause two things to screw up -- I try to laugh about this chit but I always almost end up crying LOL I contacted Hirsch -- "We have never had this Happen before" -- so no help from their end -- Tried to have the coating removed-- the chemicals would not touch/remove the coating --- but as soon as the coating was dry again, you could see the powder coming off the sides in the tank -- go figure.... I have bought another tank, but I'm really flustrated with this whole thing right now so haven't been doing anything except walking by the car and staring at it. Think I'll forget about for the car and its problems for a while and do a couple of house projects and then maybe come back to this in a couple of weeks. And then there is a vacation I've got scheduled in a couple of weeks where the wife and I are going to visit London, Paris and Rome for 2 weeks...... maybe after that I'll have my head back into the game LOL Here's pictures of how this chit is spread around my garage today (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-4702-1330113496111.jpg) (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-5239-1330113531472.jpg) (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-5383-1330113578978.jpg) Here is my old and "new" tanks -- after I got home I noticed the old tank looks about the same on the inside and the out --- could get it cleaned ans coated -- wait, I just went through that LOL (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-5894-1330113633630.jpg) Here is my new RLR 6 point roll bar that I just got and need to get it installed into the car (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-5237-1330113689485.jpg) This thing is such a sleeper it is snoring LMAO -- -- Stay warm -- did I mention I'm barefoot and wearing shorts and a t-shirt today LOL You guys are the best -- Harold Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on February 24, 2012, 21:21:21 pm OOPS just noticed your post Torque
Heres a Picture of the piston --- can't remember the exact measurment of the thickness of the piston -- but they were cast with the knowledge that they were going to be used in a turbo setting and have valve reliefs cut into them and so it was still a lot of material left. This picture you see is as the pistons came for JE, they took all the specs I had and produced the exact piston I needed. We had to do very little to them once we recieved them (http://i586.photobucket.com/albums/ss306/Fiatdude/pistonsb.jpg) This next picture shows how JE recommended that the rings be moved down because of the boost application (http://i586.photobucket.com/albums/ss306/Fiatdude/pistonconparisons.jpg) Title: Re: My '56 Oval -- Project of Doom Post by: Fasterbrit on February 24, 2012, 21:39:51 pm Thanks Fiatdude! Do you have any pix of your combustion chambers? Looks really interesting. Should make some nice power 8)
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on February 26, 2012, 20:08:43 pm This picture was taken when the engine was first disassembled after I bought it. It is showing the difference between the 48x38 that were in it and stock valves -- we were debating having Jeff do his 52x42 ? mods to the heads but eventually decided against it--- there were some modifications done before reassembly
(http://i586.photobucket.com/albums/ss306/Fiatdude/arpm008.jpg) Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on April 03, 2012, 05:09:13 am FFFFFFFFFFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUCCCCCCCCCCCCCCCCCCKKKKKKKKKKKKKKKKKKKKK
Fired it up to play with the tuning and heard a death rattle at start up. It went away as soon as the oil pressure came up, BUT, I was already reaching over to shut it off ----- when you hear the rattle, it is time disassemble --- Well with all the BS with the fuel system and other chit I guess I should of expected this... I'm putting the bitch in the garage and covering it up with crap for a few weeks, Title: Re: My '56 Oval -- Project of Doom Post by: AntLockyer on April 03, 2012, 05:18:41 am I hope it's nothing serious. A couple of weeks off sounds like a plan :(
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on April 11, 2012, 04:45:18 am chit --- something followed me home today
(http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-12904-1334114483332.jpg) Title: Re: My '56 Oval -- Project of Doom Post by: Richyrich on April 11, 2012, 12:44:17 pm Dam, dont you hate it when that happens, Not ;D
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on April 11, 2012, 19:21:11 pm Yesterday 80's here, so left car on the trailer when we got home after 800 miles and 16 hours of driving and it is freaking raining thes morning -- go figure --
This morning getting ready to pull it off the trailer in the rain (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-1050-1334156308023.jpg) These small ass seats will have to go -- talk about a wedgie when I'm trying to set in there (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-1752-1334156282780.jpg) dash --- It's not to bad considering it has set for a long time -- just needs a boost gauge LOL (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-13028-1334156250075.jpg) Title: Re: My '56 Oval -- Project of Doom Post by: AntLockyer on April 11, 2012, 20:18:56 pm Nice one, loving the panic handle for the passenger :)
Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on April 18, 2012, 17:37:33 pm (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-1741-1334766790248.jpg)
The Oval is for sale (guess I need to do an ad somewhere LOL) -- -- minus a few parts (OK a lot of the parts) you can see here Title: Re: My '56 Oval -- Project of Doom Post by: Fiatdude on April 28, 2012, 23:44:24 pm Taking Ovalholio to the Bug-in tomorrow with a FOR SALE sign on it --- Maybe someone will want me to deliver it to their house on the way home
Also taking a Brand New RLR 6-pt Roll CroMo Cage for sale also (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-5188-1335652724327.jpg) (http://i586.photobucket.com/albums/ss306/Fiatdude/photobucket-5004-1335652750426.jpg) Looking forward to seeing everyone tomorrow!!!!!!!!!!! |