|
Title: W125..... Post by: SPEEDWELL66 on January 11, 2010, 08:19:46 am HI FRIENDS!
I'm using this cam (ENGLE W125) for my 2054CC proyect, how can i get the best results using this cam? thanks for your help. Title: Re: W125..... Post by: beetlemic on January 11, 2010, 13:53:49 pm From what i have read many go with 1.25:1 rockers.
I have used stock rockers this year but for this season i will try my new oval wedge heads together with 1.25 rockers. There are lot more expirienced guys here that can tell you what to do but as always it all depends one for what purpose you are building the engine and what the other components in the engine are, the gain is perhaps 3-5% on a engine that puts out around 150hp, correct if im much to wrong 8) Title: Re: W125..... Post by: SPEEDWELL66 on January 12, 2010, 06:10:04 am thanks for your answer beetlemic. i'm using 1:25 rockers and cb performance 044 CNC round port heads whit 40x35 valves.
thanks a lot. Title: Re: W125..... Post by: Bewitched666 on January 12, 2010, 08:11:14 am Speedwell66 explain getting the best results 8)
Title: Re: W125..... Post by: Matt H on January 13, 2010, 05:52:38 am I loved my 125 with 1.25's in my 2275. I ran CB 40x35 valves in unwelded, but well ported heads with great results as my avitar shows. Very streetable with a great powerband
Title: Re: W125..... Post by: Bewitched666 on January 13, 2010, 08:07:57 am I ran the w125 with 1.25's in my street/strip 1914cc with 42x37 cnc ported heads with 10.0 cr with great result. 8)
Title: Re: W125..... Post by: bugnut68 on January 14, 2010, 00:29:45 am I was going to run it with 1.1s in the 2017 I'm currently building, but I think perhaps I'll go ahead and use 1.25's... with Porsche adjusters, of course! ;D
Title: Re: W125..... Post by: SPEEDWELL66 on January 14, 2010, 07:04:14 am i really apreciate your comments :)
well i definitelly going to use this cam. it seem's to have a lot of power for my 2054cc!!!! thanks a lot friends |