|
Title: Make my own T-Bars Post by: Zündfunke on January 12, 2010, 13:16:07 pm Came up with the idea to make my own T-Bars instead of just buying some.
Wintertime is boring since a little while... ;) Can anyone help me out with some measurements of "original" ones?! Thanks a lot! [attachment=1] Title: Re: Make my own T-Bars Post by: Donny B. on January 12, 2010, 16:34:57 pm I have one of Tim Tesnow's T-Bars here and I measured it. All measurements are in inches. I didn't have a protractor to measure the angle so I used a degree pulley. It should be close.
R= 70 degrees S= 5/8" T= 6" U= 1/2" V= 1 1/2" W= 3" X= 11" Y= 5/8" Z= 15/16" Hope this helps. Title: Re: Make my own T-Bars Post by: Koko81 on January 12, 2010, 16:37:54 pm Du bist mir einer!
;) Give me a Call Title: Re: Make my own T-Bars Post by: Zündfunke on January 12, 2010, 18:52:00 pm Thanks a lot Donny!
This helps! The next few evenigs are save! :D |