The Cal-look Lounge

Stock Oil Cooler, very good condition, like new. £30

Fully polished Alternator with CB Billet Hex Nut and Pulley as pictured below £170

(http://farm4.static.flickr.com/3463/3400037904_d358a8d402_o.jpg)

CB Sand Seal Pulley as in above picture, anodized Black £35

Aeromotive Fuel pump for Street/Strip High Output, in Excellent condition only on the car for 6 months 125
Pic and details below:

(http://i227.photobucket.com/albums/dd37/StripTeaseRacing/DSCF0742.jpg)

For High-HP Street Machines
Rated for continuous carbureted duty, both pump series have composite rotors, stainless steel vanes, heat-treated steel plates, and -8AN or 3/8" NPT ports. Also in a marine or show-quality polished Platinum edition.

Street/Strip Fuel Pumps
For carbureted engines making 200 to 750 HP with standard regulators or up to 1000 HP with dynamic bypass-style regulators. Ideal when more line pressure, flow volume, and reliability are desired. Flows 140+ gph at 13.5 volts and is alcohol compatible.

High Output Fuel Pumps
For carbureted engines making 200 to 600 HP without using a separate regulator. Internally regulated at 7 psi, these pumps should not require a separate regulator on most carbs. Ideal for high output street and mild race cars. Flows 90+ gph at 5 psi.

Just to point out that our pump is the 3/8 NPT version and the filters either side of the pump are not included :)