|
Title: popping out of first Post by: dannyboy on April 23, 2010, 19:31:06 pm at the pod today did a few runs fine then it stARTED JUMPING OUT OF FIRST EVERYTIME I DROP THE CLUTCH ITS OK IF I EASE THE CLUTCH OUT AND SLOWLY DRIVE FORWARD BUT AS SOON AS I FLOOR IT IT JUMPS OUT ITS FINE IN EVERY OTHER GEAR ooopps sorry about the text :P
any help greatly appreciated ??? Title: Re: popping out of first Post by: daniel on April 30, 2010, 18:21:17 pm Hi I would bet itīs the tranny mounts that are loose/worn or then itīs the gearbox.
Title: Re: popping out of first Post by: mcmscott on May 11, 2010, 16:15:15 pm The engaugement(probably spelled wrong)teeth on first are worn, you probably also have an early 1-2 operating sleeve(slider)with no back cuts on first which multiplies the problem, a trans overhaul is in your future
Title: Re: popping out of first Post by: dannyboy on May 13, 2010, 22:43:44 pm cheers mr cogbox for sorting it out you are a star ;D ;D roll on garys picnic with my newly rebuilt box and tied in framehorns and traction bar ::) ;D and new cam /cr upgrade 8)
|