|
Title: Good source for single HD springs for Type IV/914 2.0L Post by: Jim Ratto on May 27, 2010, 23:41:31 pm Who's got a good single HD spring in the US? Thanks
Title: Re: Good source for single HD springs for Type IV/914 2.0L Post by: Rasser on May 28, 2010, 06:49:10 am T1 spring and retainer is also an option?
I use type 1 HD single springs from Aircooled.net on my TypeIV/914 2.0L Or perhaps you can get type IV HD springs from pelican parts, Jake Raby, FAT, EMW etc. etc.? Title: Re: Good source for single HD springs for Type IV/914 2.0L Post by: Big Power on May 28, 2010, 15:55:36 pm If you can set the springs up some where close to 1.500 installed height, our VW650 spring is the best qaulity VW diameter spring on the market.
Title: Re: Good source for single HD springs for Type IV/914 2.0L Post by: Jim Ratto on May 28, 2010, 16:15:00 pm If you can set the springs up some where close to 1.500 installed height, our VW650 spring is the best qaulity VW diameter spring on the market. Thanks Pat. I'm picking a set up for my 94 x 78. When I get the 914 motor, I'll look @ spring height. If you see Baya tell her I said hello Jim Ratto |