|
Title: CB´s Titanvalves Post by: Petter Carlberg on July 21, 2010, 22:13:25 pm Can someone confirm if CB´s SUPERGRIP valelocks and retainers fit on their titanvalves.
Title: Re: CB´s Titanvalves Post by: andy M. on July 22, 2010, 07:41:55 am yes they do, or else i'm in real trouble!
Title: Re: CB´s Titanvalves Post by: Petter Carlberg on July 22, 2010, 11:43:59 am yes they do, or else i'm in real trouble! Are you running VW-diameter springs? Title: Re: CB´s Titanvalves Post by: andy M. on July 22, 2010, 13:33:47 pm certainly, jpm duals with alumec retainers, fk89, cb 28mm lifters, manton push rods, cb rockers, revs happily to 8500rpm
andy Title: Re: CB´s Titanvalves Post by: Petter Carlberg on July 22, 2010, 16:29:08 pm certainly, jpm duals with alumec retainers, fk89, cb 28mm lifters, manton push rods, cb rockers, revs happily to 8500rpm andy I´ve checked it out now, Cb´s SuperGrip locks doesn´t fit their titan valves. You are running JPM´s stuff, and yes they fit. Title: Re: CB´s Titanvalves Post by: andy M. on July 22, 2010, 17:58:37 pm well, I've got cb valves with cb supergrips, they seem to work!
Title: Re: CB´s Titanvalves Post by: jr59 on July 22, 2010, 19:35:16 pm We ran 48*38mm CB'titanium valves from 2 years on CE heads with the standard CB's suregrips .But they are those for the CE heads (10° i think comparing to the 7° on 044 heads).
We had no failure . seems to be a really good bargain! ;) Title: Re: CB´s Titanvalves Post by: Petter Carlberg on July 22, 2010, 19:52:34 pm The titanvalves has "Chevy-style" single groove. CB´s Supergrip valvelocks fits very por in these grooves.
|