The Cal-look Lounge

When the rear end on the bug was converted to IRS it pushed the width out, so to solve this we had Wayne Allman narrow the bearing retainers in the arms by 1 inch. The arms have also been powdercoated black, and the price includes the eccentric bushes that were specially made by Wayne also.
£250.

Can be seen in the picture below.
(http://i227.photobucket.com/albums/dd37/StripTeaseRacing/b8e0e345.jpg)

Hi
Very interested in these. I have just done an IRS job on my cal look zwitter.
Where are you?
Do you have a number I can call you on to ask a few questions?


JG54 Greenhearts

Hi Rich,

Steve is sending you an email. We are based in North Nottinghamshire, i travel around alot with my job though.

Adele

We should have said in the advert that the arms are not available immediately as we still need them to roll the car around until it goes away for work on the rear.

The arms are stock type 1 which Wayne Allman narrowed 1" because we found out after the IRS conversion that it widens the track! Basically the bearing retainers are cut out and moved inwards so the actual arm hasn't been cut. Also to help with the camber when running lower than stock the shock mounts were cut off and re-welded on the opposite side (basically in fitment the a arms are flipped upside down and left to right. This is the best way to get correct camber when running lower!)

We will have our complete axles set-up for sale also which uses type 2 and porsche 944 CV joints and stub axles. The stub axles are porsche 944 but still uses a vw 12 spline end so any VW brake will still fit.

So we have for sale
2 x used T2 GKN CV joints - £40 pair
2 x used Porsche 944 GKN CV joints - £40 Pair
1" narrowed Sway Away axles - £100
1 Pair of Porsche 944 Stub Axles - £40

I will post some pictures up later of the axles and CV's.

Thanks
Steve

Thanks Adele
Very keen on the Arms and the axles assuming they fit stock CV joints, fed up with my Fuchs poking outside the wings!
I assume the car ran straight with them and the dent in the picture (RHS) was for some other reason?

Rich

Hi Rich, did you get the email I sent you?

Yes the car ran arrow straight every pass and the incident was not caused by the car..

The axles and arms will fit stock type 1 VW fitment no problem.

Steve

Thanks Steve, Yes I did, perfect.
When's a good time to Call?

Rich

hi

if becker 4 doesnt take the arms i will inc the other bits i need to fit a bus box in my bug :)

cheers andy

Hi, The Axles, Arms and Bushes are all provisionally sold to Rich.

We still have
2 x used T2 GKN CV joints - £40 pair
2 x used Porsche 944 GKN CV joints - £40 Pair
1 Pair of Porsche 944 Stub Axles - £40

ok ill have those for a start :) let me know it the other stuff becomes avalible

cheers

Hi, No problem. You can paypal us at sales    @ vintageair     .co.uk (you get the idea, had some spam recently!  ::) )

The CV joints are available now, the stub axles will be a little while until our car goes in to start the work, we need them to transport the car. You can either pay for them all now or just the CV joints ?

So either £80 now and £40 later, or all together now :)

Thanks Adele.

wiill send money tmw when get paid :)

cheers and

No problem, will look out for it. Cheers Adele.

A-arms and axles sold, many thanks Steve and Adele
I'll paypal the funds ASAP
Rich

money sent let me know when there ready :)