|
Title: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: Adele AW on September 14, 2010, 22:38:09 pm We are selling our Mikuni throttle bodies, fuel rails and fittings and cable linkage.
These were custom designed by Marco Mansi, the throttle bodies are a single Mikuni body joined up to a second one making a pair with a custom linkage. The bodies are set up with custom IDA base plates as the whole setup was designed to look like IDA's and also fit IDA manifolds. On the cable linkage, the main part of this sits on top of the engine case as we had no cooling, it controls the cables which attach to both accelerator ramps on the bodies. Throttle body port size is 51 at the top and tapers down to 48 at the bottom. The fuel rails come with -6 fittings and there are four 440cc Injectors. Also included is the throttle position sensor, and 4 polished one off stacks. These are real one off's but using commonly available parts :) Price is £850 and we can ship worldwide :) (http://i227.photobucket.com/albums/dd37/StripTeaseRacing/d496aaa9.jpg) (http://i227.photobucket.com/albums/dd37/StripTeaseRacing/02f9c894.jpg) (http://i227.photobucket.com/albums/dd37/StripTeaseRacing/9c202598.jpg) (http://i227.photobucket.com/albums/dd37/StripTeaseRacing/d03885d8.jpg) (http://i227.photobucket.com/albums/dd37/StripTeaseRacing/724c9599.jpg) (http://i227.photobucket.com/albums/dd37/StripTeaseRacing/8041c65f.jpg) Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: Neil Davies on September 15, 2010, 16:00:05 pm These are real one off's but using commonly available parts :) You forgot to say that they look the bollocks! I think they're ace! ;) Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: Adele AW on September 19, 2010, 10:00:39 am These are real one off's but using commonly available parts :) You forgot to say that they look the bollocks! I think they're ace! ;) Cheers Neil :) Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linka Post by: Adele AW on September 27, 2010, 16:20:19 pm Up they go, need to sell them :)
Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: Adele AW on October 01, 2010, 15:57:14 pm Price changed to 850 GBP
Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: SteveW on October 10, 2010, 22:09:38 pm Can take to Slough... :)
Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: m.m.p on October 23, 2010, 22:01:52 pm some info :) they are 48mm at the bottom, 55mm at the top of the throttle body , 65mm at the top of the trumpet, have a 52mm throttle plate, the system has a continious taper from top to bottom, this increases air speed to the motor = more power :) there is anough fuel injector for over 300hp, this combo made over 20hp more than 51.5mm IDA's on the SAME N/A motor!!!!!! and there 1/3 lighter that IDA's
a steal at £850 :) Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: SteveW on October 23, 2010, 22:14:06 pm Thanks Marco :) These need to sell so we can continue with our rebuild!
Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: SteveW on November 02, 2010, 18:33:27 pm Up :)
Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: Adele AW on November 02, 2010, 21:36:48 pm Sale Pending.... ;D
Title: Re: Mikuni ThrottleBodies(IDA Fittment)-Fuel Rail/fittings/Injectors-Cable Linkage Post by: SteveW on November 06, 2010, 22:56:21 pm Sold! :)
|