|
Title: Cam ID Post by: Torben Alstrup on January 27, 2011, 13:52:33 pm Hello
Last night I got a cam in my hands that I could not identify. The cam is VERY wide on the upper egg part, but only lifts 8,4 - 8,5 mm on the cam. The ID stamp at the gear end says: H G 3. I take it that it is an old grind, most likely Swedish or Finnish, as the engine had a lot of trimco stuff and an old design oil pump that resembles a Nickerson (32 mm gears) but has better finish than the Nickersons normally had. Let me hear ya ! Torben |