|
Title: Piston cylinders hone tool and valve seat cutters !!!! Post by: Frenchy Dehoux on March 02, 2011, 20:39:19 pm I need some feed back from those of you that are doing your own engine rebuilding and machining which is the best or second best cylinder hone tool to use is the beads type OK or the stones blades. Also which valve seat cutters are you using i.e stone or cutters. Thanks !!! Frenchy Title: Re: Piston cylinders hone tool and valve seat cutters !!!! Post by: karl h on March 04, 2011, 07:53:23 am i use neway cutters, real easy to use by hand
Title: Re: Piston cylinders hone tool and valve seat cutters !!!! Post by: Joel Mohr on March 04, 2011, 17:01:44 pm Bead type hones are nick-named "bottle hones" because that's what your cylinders will measure like when you are done....DON"T USE ONE! The 3 stone spring-loaded ones work good enough to take out minor scratches, but if you can, have them power honed....I use a NEW WAY seat cutter, it's a bitch on the wrist, but works great!
Title: Re: Piston cylinders hone tool and valve seat cutters !!!! Post by: Frenchy Dehoux on March 04, 2011, 18:56:44 pm Bead type hones are nick-named "bottle hones" because that's what your cylinders will measure like when you are done....DON"T USE ONE! The 3 stone spring-loaded ones work good enough to take out minor scratches, but if you can, have them power honed....I use a NEW WAY seat cutter, it's a bitch on the wrist, but works great! Joel Thanks that is what I have bought and you are right tough on the wrist but does a nice clean and even cut. After that I rinse the cylinders with soap and water and dry them and plastic bags. Frenchy Title: Re: Piston cylinders hone tool and valve seat cutters !!!! Post by: Torben Alstrup on March 04, 2011, 22:47:19 pm Sunnen static honer and Serdi valve seat cutter.
T Title: Re: Piston cylinders hone tool and valve seat cutters !!!! Post by: Udo on March 05, 2011, 08:40:15 am I have a mira centronic which is the best seat cutter in the world . It finds 100% center of the guide :D
Udo Title: Re: Piston cylinders hone tool and valve seat cutters !!!! Post by: K-Roc on March 05, 2011, 09:23:27 am Here is some great information on seat cutting from some of the best cylinder head guys around....
http://www.speedtalk.com/forum/viewtopic.php?f=1&t=334&hilit=Neway And another 160 posts.... http://www.speedtalk.com/forum/viewtopic.php?f=1&t=19059&hilit=Neway Udo how does your setup work for cutting each valve seat to the same depth? I have only used the Mira setup that was on a milling machine and we simply cut each seat down to a specific number on the digital readout. ( nice and repeatable) I use a setup from TNS Machines I would love to get their center less valve grinder some day....... http://www.tnsmachines.com/Home.aspx Title: Re: Piston cylinders hone tool and valve seat cutters !!!! Post by: j-f on March 05, 2011, 09:25:48 am When you hone cylinders, is it just to have a surface finish or to blueprint cylinder to have an accurate piston to cylinder wall clearances?
Title: Re: Piston cylinders hone tool and valve seat cutters !!!! Post by: Torben Alstrup on March 05, 2011, 21:28:35 pm Both. It depends on the applikation.
I think the largest "problem" with the Serdi 250 centerless + & of course the CNC is the guy standing behind it. The 250 onward is at least as precise than most other machines. Plus, it is faster to use compared to most. I saw the new Mira at an Auto show a couple of weeks ago and it definitely looked interesting. - The price tag didīnt though. If the guy at the end of the tool knows his stuff, he can make a better job with an old handpulled Mira, than the guy at the $ 50000 CNC cutter that doent know what heīs doing. T |