|
Title: DDS type power pulley info Post by: Fritter on March 29, 2011, 05:32:23 am Picked up a DDS or DDS type power pulley last weekend. It measures:
a. 135mm or 5.3" overall diameter. What size fan belt is used for this pulley? b. 44mm or 1.7" diameter sand seal surface. Is there a modern press in sand seal that can be used for it? Title: Re: DDS type power pulley info Post by: Bruce on March 30, 2011, 04:26:22 am Go to your local Ford dealer and buy a JB332 fan belt. The OEM to Ford is Gates. This belt is indestructable!
It is 7/16" wide, 33¼" long. Your pulley ratio will be slightly above 1:1. Title: Re: DDS type power pulley info Post by: Fritter on March 30, 2011, 17:24:02 pm Thanks Bruce. What do you use for sand seal? Or do you have a non sand seal version.
Title: Re: DDS type power pulley info Post by: Lids on March 30, 2011, 18:35:10 pm ;)
Title: Re: DDS type power pulley info Post by: TexasTom on March 30, 2011, 18:38:01 pm ;) Cool, there you go ... just cut open the package and measrue the belt! ;D Title: Re: DDS type power pulley info Post by: Fritter on March 30, 2011, 18:58:37 pm Problem, I see a DDS pulley and an Empi belt! Like fire and water! :D
Title: Re: DDS type power pulley info Post by: . on March 31, 2011, 04:28:37 am Power Pulley Belt
For those with a Power Pulley, you will need a smaller belt. Brand Part Number Size Metric Conversion EMPI 9120 9.5mm x 850mm CB Performance 2047 10 x 865mm Gene Berg GB 445 Gates 7325 13/32" x 33 1/8" 10.3188 x 841.375mm Gates 7330 13/32" x 33 5/8" 10.3188 x 854.075mm Gates 7335 13/32" x 34 1/8" 10.3188 x 866.775mm Title: Re: DDS type power pulley info Post by: Bruce on March 31, 2011, 05:40:32 am Thanks Bruce. What do you use for sand seal? Or do you have a non sand seal version. I have a few of those pullies, and all of them are VW style that screw the oil back in. I've never had a leak. |