|
Title: What size of and type of fuel line and pump works best with 2L plus IDA Motor Post by: Russell on April 28, 2007, 09:46:14 am What size of and type of fuel line (bore diameter) and pump works best with 2L plus IDA Motor
I was thinking about useing a Holly 97 PPH "RED" and some 7mm aeroquip hose and fittings but wasnt sure if this would provide enought fuel for 2332cc drag motor ? Any suggestions appreaciated. Russell Title: Re: What size of and type of fuel line and pump works best with 2L plus IDA Motor Post by: Zach Gomulka on April 28, 2007, 17:21:22 pm The Holley pump will support it! I would consider some larger line though.
Title: Re: What size of and type of fuel line and pump works best with 2L plus IDA Motor Post by: Bill Schwimmer on April 30, 2007, 05:20:08 am Yes ,the Holley pump would be fine. How much power do you think it would make ? I too think that 7mm line is a bit small. If you are using steel braided line -8 to the regulator & - 6 to the carbs would work fine. If you plan on making more than about 230 or so hp you might take a look to see what others are running to support that power level. Have fun Bill
Title: Re: What size of and type of fuel line and pump works best with 2L plus IDA Motor Post by: Russell on April 30, 2007, 07:28:09 am Bill Thanks
Yes Im planning to use -8 for both the tank to centre chassis fuel line and -8 all the way to the carbs, It 2332cc with a 221.6BHP see below. |