|
Title: Coilover conversion spring plates Post by: SteveW on July 12, 2011, 15:24:42 pm As we have a new rear end being built these are now surplus to requirements. Bought from VW parts in the states. This is the write up they give..
"A Bolt-In Kit That Allows You To Eliminate The Rear Torsion Bars In Order To Change To Coil-Over Suspension. Comes With High Quality Chromoly Heim-Ends With Kevlar Liners. Has Machined Load Boss So Wheel Load Is Transferred To Torsion Housing. The Load Boss Is Very Important For The Aggressive Driver. Without It, The Attachment Bolts Will Break! Beware Of Cheap Imitations That Do Not Have This Feature! Made In The U.S.A." Obviously we have used them but they are in good condition, they were powder coated black but this has been wotn/chipped, they are still at Wayne Allmans shop at the mo and I will pick them up Saturday and take a photo. Below is a photo from VWparts.net and then one fitted to ours.. (http://www.vwparts.net/mm5/graphics/00000001/coilspringplates.jpg) (http://i227.photobucket.com/albums/dd37/StripTeaseRacing/59RHD/heim_joint.jpg) £200 free shipping to Europe Title: Re: Coilover conversion spring plates Post by: SteveW on July 12, 2011, 21:03:00 pm Pending :)
|