|
Title: DTA E48 EXP electronic fuel injection Post by: Frallan on August 19, 2011, 21:20:00 pm ECU and wiring harness. No sensors included. 3500 SEK or 400 € plus shipping. Write to me on fredrik.reichel@tetrapak.com E48 - DTA E48EXP Engine Management Computer -Full Ignition control and amplification for up to 4 cylinders distributorless, 8 cyl with distributor -Full fuel control of up to 16 injectors (staged and switchable on RPM in 2 banks ) -Amplified Coils Support -Compensation for air temp / water temp / MAP or barometric pressure on fuel AND ignition -Closed loop Lambda control -Turn off closed loop above TPS & RPM -Full turbo pressure control variable by RPM with overboost protection -Manifold Pressure as main load NEW -Full single gear traction control (launch control) -Steering wheel button controlled start line RPM limit -Full power shift cut -Temperature dependant Idle speed control via PWM valve (shared second bank of injectors) -Auxiliary output switchable on RPM / water temp / manifold pressure (shared turbo control) -Dedicated shift light output -Dedicated Tacho output -Two stage main RPM limiter -Dedicated fuel pump control -Full startup fuelling map -Improved idle speed control -Throttle transient enrichment map -Self test facilities for ignition and injection -Sensor diagnostics and peak recording -Real time mapping, no EPROM's required, PC only or PC+Dyno Control Box -Voltage in warning limits during Mapping -Software programmable for most crank wheels (BMW, Ford, GM, Porsche, Renault, Honda Blackbird, Rover, VW, 361, 602 etc.) -All main 3D maps (20 x 14) have user programmable break points on throttle and RPM -Max. RPM 14,000 (http://i153.photobucket.com/albums/s207/Frallan2/dta3.jpg) (http://i153.photobucket.com/albums/s207/Frallan2/dta1.jpg) (http://i153.photobucket.com/albums/s207/Frallan2/dta2.jpg) |