The Cal-look Lounge

Cal-look/High Performance => Cal-look => Topic started by: -Alex- on September 12, 2011, 19:59:06 pm



Title: Transaxle rear mount bolt hole dimensions / distances?
Post by: -Alex- on September 12, 2011, 19:59:06 pm
Hello, i have lost old transaxle rear mount piece, and i need dimensions / distances for rubbermount bolt holes. Anyone please? :) In my pic they are 139mm ans 117mm..

(http://img856.imageshack.us/img856/9218/takakannakekokoonpano.jpg)


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: Donny B. on September 12, 2011, 20:24:25 pm
I just measured one in my garage and it appears to be 300 mm between the two large bolt holes.  I measured it in inches, but on converting it to mm it was right there within a couple of thousandths of a millimeter.


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: -Alex- on September 12, 2011, 20:35:48 pm
Thanks, 300mm is correct, but that measurement i have already and also the shape of the mount.   I need bolt hole distances for original rubber mounts, on my picture they are 139mm and 117mm.


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: Donny B. on September 12, 2011, 21:21:05 pm
The 139mm should be about 203mm and the 117mm should be about 109mm.  Remember I measured these in inches then converted them to metric.  My conversion program is pretty good, but I may not be...LOL!


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: -Alex- on September 12, 2011, 21:25:02 pm
Are distances straight from center to center?




Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: TexasTom on September 12, 2011, 22:08:03 pm
I don't want to confuse anyone, but I measured with a rule and got:
117 = 105mm measured straight across and 139 = 175mm

Hope it helps more than hurts.
TxT


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: -Alex- on September 12, 2011, 22:12:49 pm
Ok, thanks. This sounds better  ;D  Shape is perfect, but i forgot to measure rubbermount bolt holes.    One guy wants this kind heavy duty rear mount, maybe from 6mm steel :)


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: Donny B. on September 12, 2011, 22:39:13 pm
Remember the rubber mount holes are slotted.


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: Donny B. on September 12, 2011, 23:04:13 pm
All of my measurements are center to center as best as I could.


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: -Alex- on September 13, 2011, 06:45:39 am
Yes, thank you both :)   Yes, i did make the holes slotted.


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: TexasTom on September 13, 2011, 12:28:31 pm
All of my measurements are center to center as best as I could.

You and me both Donny.
Hard to get a perfectly accurate measurement ...  ;)


Title: Re: Transaxle rear mount bolt hole dimensions / distances?
Post by: -Alex- on September 13, 2011, 19:50:18 pm
Well, holes are big, and he can make them bit larger perhaps :D