|
Title: 67 cabrio lid repro germany Post by: pupjoint on October 24, 2011, 13:53:47 pm in the volksworld mag Feb 2007, page 8, on the review on he black Cal Look 67 belonging to ALex Taylor, article mentioned the pressed repro lid was sourced from Jorg Beckmann in Germany.
Anybody has his contacts or has any information on this lid? thanks Title: Re: 67 cabrio lid repro germany Post by: Rick Meredith on October 26, 2011, 22:51:37 pm Bump
Title: Re: 67 cabrio lid repro germany Post by: cel on October 26, 2011, 23:18:20 pm Hi!
I dont know but maybe its this man: VW Veteranenteile Jörg Beckmann Hagenstr. 86 D - 48301 Nottuln Deutschland vwvetjbeckmann@t-online.de +4925021777 nice greetings Marcel Title: Re: 67 cabrio lid repro germany Post by: Rennsurfer on October 27, 2011, 00:16:55 am Bump I see what you did there, Rick. And if you're interested in one, and don't mind waiting till mine's done (to check the workmanship)... I can refer you to my friend that's gonna build one for me. It will look exactly like a factory one. Title: Re: 67 cabrio lid repro germany Post by: deano on October 27, 2011, 00:26:07 am Why not just find an original one? There are around..... I may even have a spare available.
Title: Re: 67 cabrio lid repro germany Post by: pupjoint on October 27, 2011, 01:04:06 am thanks guys,
deano, i am located at South East Asia, the place where moto GP was held last SUnday, shipping a lid over here from the US is $$$ and i am trying to check out what other options are available before going that route, especially if they are making pressed repro. ;D plus i do have friends in germany and some parts of EUrope who can hand carry back for me. ;D Title: Re: 67 cabrio lid repro germany Post by: Rick Meredith on October 27, 2011, 02:18:56 am Why not just find an original one? There are around..... I may even have a spare available. Originals tend to be either beat or pricey. If you've got a nice one in your stash Deano, I'm all ears. Title: Re: 67 cabrio lid repro germany Post by: Rick Meredith on October 27, 2011, 02:20:01 am Bump I see what you did there, Rick. And if you're interested in one, and don't mind waiting till mine's done (to check the workmanship)... I can refer you to my friend that's gonna build one for me. It will look exactly like a factory one. Come on Fred.. You know me as well as anyone... when have I been in a rush on this car? ;D Title: Re: 67 cabrio lid repro germany Post by: Zach Gomulka on October 27, 2011, 02:43:20 am The one I found for AssHull's car was $250 I think, needed a bit of work but not bad. I thought that was a fair price.
Title: Re: 67 cabrio lid repro germany Post by: Rick Meredith on October 27, 2011, 02:48:31 am The one I found for AssHull's car was $250 I think, needed a bit of work but not bad. I thought that was a fair price. That was well bought. ;) Title: Re: 67 cabrio lid repro germany Post by: Rennsurfer on October 27, 2011, 02:50:48 am Come on Fred.. You know me as well as anyone... when have I been in a rush on this car? ;D So, bottom line... you saw what I did, there? ;D Title: Re: 67 cabrio lid repro germany Post by: Rick Meredith on October 27, 2011, 02:54:16 am Come on Fred.. You know me as well as anyone... when have I been in a rush on this car? ;D So, bottom line... you saw what I did, there? ;D Yeah... pretty much. ;) The goal is to have the car ready for Bug-In... year to be determined ;D Title: Re: 67 cabrio lid repro germany Post by: Zach Gomulka on October 27, 2011, 03:46:03 am Hahahah! ;D
Title: Re: 67 cabrio lid repro germany Post by: Rennsurfer on October 27, 2011, 04:06:03 am The goal is to have the car ready for Bug-In... year to be determined ;D I'm fully seeing what you did, THERE, too. ;D Title: Re: 67 cabrio lid repro germany Post by: pupjoint on October 27, 2011, 04:25:37 am The one I found for AssHull's car was $250 I think, needed a bit of work but not bad. I thought that was a fair price. 250 is a very very fair price. anyone here shipped as lid out of the US before? Title: Re: 67 cabrio lid repro germany Post by: Rennsurfer on October 27, 2011, 04:30:13 am Why not just find an original one? There are around..... I may even have a spare available. Simple, really... because for some strange reason, most people are either on crack or are under a misguided notion that convertible decklids (especially '67) should go for stupid amounts of money. It's actually cheaper to build one than pay the current prices. Mine will only cost around $200 when it's done and will look perfect. Title: Re: 67 cabrio lid repro germany Post by: deano on October 27, 2011, 04:31:47 am Why not just find an original one? There are around..... I may even have a spare available. Originals tend to be either beat or pricey. If you've got a nice one in your stash Deano, I'm all ears. See me at Drag Day... I will bring it along just for the heck of it... deano Title: Re: 67 cabrio lid repro germany Post by: pupjoint on October 27, 2011, 04:36:27 am Why not just find an original one? There are around..... I may even have a spare available. Simple, really... because for some strange reason, most people are either on crack or are under a misguided notion that convertible decklids (especially '67) should go for stupid amounts of money. It's actually cheaper to build one than pay the current prices. Mine will only cost around $200 when it's done and will look perfect. care to share some pics of the process Fred? i can also get it done locally, but it wont look like the real deal, only close. i have 2 options locally 1. cut and weld from a late model and lengthen the ends so they are equal at the end of the louvres. 2. knock by hand - this is a bit difficult as nobody has the real deal in this part of the world. Title: Re: 67 cabrio lid repro germany Post by: Rick Meredith on October 27, 2011, 04:48:32 am Why not just find an original one? There are around..... I may even have a spare available. Originals tend to be either beat or pricey. If you've got a nice one in your stash Deano, I'm all ears. See me at Drag Day... I will bring it along just for the heck of it... deano PM Sent! Title: Re: 67 cabrio lid repro germany Post by: Rennsurfer on October 27, 2011, 06:29:04 am care to share some pics of the process Fred? i can also get it done locally, but it wont look like the real deal, only close. i have 2 options locally 1. cut and weld from a late model and lengthen the ends so they are equal at the end of the louvres. 2. knock by hand - this is a bit difficult as nobody has the real deal in this part of the world. Private message sent. Title: Re: 67 cabrio lid repro germany Post by: Dan Mazur on October 27, 2011, 06:51:16 am Private Message reporting for duty, sir!!!
Title: Re: 67 cabrio lid repro germany Post by: Steve67 on October 27, 2011, 07:34:05 am Hey there,
I know Jörg, he is lives 10 km from my hometown. The contact details cel posted are correct. I`m not sure if he speaks English. The vents are pressed into original sedan decklids. They are not welded in... I planning to have one done for my 67 as original ones are hard to find in Germany. If its done one day I will post some pictures. Best regards Stefan Title: Re: 67 cabrio lid repro germany Post by: henk on October 27, 2011, 11:32:03 am any body who has idea what the price is for a repro convertible decklid?
maybe the difference between a repro and a originale one isn't that big. henk!!! Title: Re: 67 cabrio lid repro germany Post by: pupjoint on October 27, 2011, 13:43:04 pm Steve67,
so is it a completely new lid or Jorg does it on an existing lid? henk, i have sent an email to Jorg at the email address above. as soon as i get a price i will post here. Title: Re: 67 cabrio lid repro germany Post by: Steve67 on October 27, 2011, 20:18:36 pm @pupjoint: He converts sedan lids...
Title: Re: 67 cabrio lid repro germany Post by: Tobi/DFL on October 28, 2011, 10:13:08 am Hi Steve,
if you are looking for an original 67 convertible decklid give Helge Ohmes a call. I found one on this year´s hannover 1st of may show swap meet and he bought it. As far as i know he wants to sell it. Bye, Tobi P.S. Are you Stefan from Heilbronn who got an ovalwindow convertible rearview-mirror from me some years ago? Title: Re: 67 cabrio lid repro germany Post by: Helge/DFL on October 28, 2011, 11:45:47 am Hi Steve,
my 67-Conv.-decklit is already gone... (thanks Tobi) Title: Re: 67 cabrio lid repro germany Post by: Steve67 on October 28, 2011, 14:53:52 pm Hey Tobi,
no, I am not... I live in Wuppertal. Best regards Stefan |