|
Title: GB Shifter Post by: Jesse/DVK on January 02, 2012, 20:39:33 pm Guys,
I bought a Gene Berg shifter with the small writing. Could anyone tell me if I still need to put the spring as orignal between the shifter and plate? I now have some play in every gear. Any tips on adjusting this? Jesse Title: Re: GB Shifter Post by: Harry/FDK on January 02, 2012, 20:55:25 pm Jesse, as far as i know, and reading the Berg Instructions, No spring. Did you renew the nylon bushing holding the shift-rod ?
Title: Re: GB Shifter Post by: Jesse/DVK on January 02, 2012, 21:24:31 pm Harry, thanks. That was my next idea to replace the shift rod bushing. Already replaced the coupler last year so that one should be ok.
Maybe when I drive the car I have less play due to power on the gearbox (or something like that :P ) Title: Re: GB Shifter Post by: Harry/FDK on January 02, 2012, 21:29:27 pm Jesse, how much is "play"... I have a little in all gear positions with coupler and shiftrod bushing installed.
Title: Re: GB Shifter Post by: Jesse/DVK on January 02, 2012, 21:34:33 pm In all gears about 1,5 cm left to right (1nd & 2nd) / right to left (3rd & 4th) and about 0,5cm forward to rear
Title: Re: GB Shifter Post by: Harry/FDK on January 02, 2012, 21:39:34 pm Just checked. Same here. (now put the Fu back into the player).
Title: Re: GB Shifter Post by: Jesse/DVK on January 02, 2012, 21:41:28 pm Thanks Hell on wheels! 8)
Title: Re: GB Shifter Post by: Harry/FDK on January 02, 2012, 21:43:34 pm Thanks Hell on wheels! 8) Youre welcome, California Crossing ! |