|
Title: Bleeding brakes with hydraulic hand brake?? Post by: Mkracing on March 26, 2012, 22:06:15 pm Hi guys, is there any speciel way to bleed the brakes with a hydraulic hand brake??
I have CB wide 5 brakes in the front, and csp 205 mm race brakes in the rear. But I think the hydraulic hand brake causes some problems. I Also have line lock installt. The pedal goes way down to the floor...!! And there is no leake anywere!! Morten Title: Re: Bleeding brakes with hydraulic hand brake?? Post by: Basti on March 27, 2012, 07:39:13 am Hi Morten!
I had the same problem! Pump 3 times with the pedal, open the valve at the calliper, and pump one time with the handbrake, hold the handbrake and close the valve. Do this 2 or 3 times round the car and you have preassure on the pedal... Cheers, Basti Title: Re: Bleeding brakes with hydraulic hand brake?? Post by: Mkracing on March 27, 2012, 14:29:52 pm Okay, thanks Basti, I will try that;-)
Title: Re: Bleeding brakes with hydraulic hand brake?? Post by: Mkracing on April 25, 2012, 19:41:19 pm Still can get the brakes to work as I will. Can it be the master cylinder?? Its the one with (20.64 mm) Is it to big, for the small kalibers from strange enginering??
|