The Cal-look Lounge

Still for sale is:

- Real Empi 8-spokes
- Stewart Warner gauges

And have a look below for lowered prices and pictures!




Some might say I lost my marbles, others might think I have seen the light, while still others just profit from my short lapse in sanity!

Up for sale is some stuff I have been hoarding. Some of it is actually pretty nice stuff that does not come up for sale that often. So grab your chances while you can. And do consider, for all you Euro Trash, the parts are in Belgium already, so less of a hassle with shipping and taxes, possibly even the posibility of pick-up.

First up is a Hurst bent Copper shifter. Pretty good condition of the copper, not too much pitting of the copper. The knob is clearly missing and the plastic base is cracked. But you do get a genuine Ompi included in the deal to salvage the needed parts from.

SOLD and SENT!

And here is another much coveted shifter: A European Bug-In 1 shifter, limited to 77 pieces, this is number 60 of the lot. Never ever used, not even test fitted, but had to unpack because of moisture getting into the blister, saving the leather.

SOLD!

Up next is a blue berg carb linkage! In excellent original hammer paint condition. You either like it or most likely you don't, but it is history Baby!

SOLD, SENT and going to a good home!

A very early DDS power pulley in NOS condition (some would even say it is NOS!). Not cut for sand seal.

SOLD!

A NOS piece of kit again, this time a race trim deep sump. Immaculate condition.

GIFTED!

Some steering wheels, one of them NOS again, a Springalex without boss.

SOLD!

And a not so new Porker steering wheel, the one with the little butterfly for a hornpush. Pretty good condition appart from some small cracks that could do with fixing and absolutely complete to the smallest bolt except for the leather pad.

SOLD!

From Steering wheels to just wheels. A set of fake Porsche 356 wheels with some patina. Mixed set of wide and narrow (think 4,5 and 5,5).

SOLD

Where are the Fiat and NSU specials builders. Get the best Cal-Look wheel at the right size for your small car!

Something that needs a special buyer! These were going to end up on my Cal Look Fiat 600 and would have been great under it. A set of Genuine EMPI 8-spokes in 13 and 14 inch. By a set I actually mean 2 sets of 4 of each, with 4 repro aluminum centercaps of super high quality. Needless to say the rims are old and might need some work (one of the 13 inch needs welding to the outer edge on the front), but a perfect set of 4 with spares could definitely be mixed up.

Like I said, make me a crazy offer for 8 pieces of cal-look history! Centercaps alone are worth a nice sum of cash!

NOS again! a black Talbot Yorck mirror, perfect condition, complete with hardware (2 parker screws  ::))

SOLD and SENT!

And something really rare to match it, a Talbot Berlin interior rear view mirror with suction cup  :o  Very nice condition.

Gone as a GIFT!

Some nice interior parts again, a FULL set of stewart warner gauges. These originally come of a camaro, so some of them might need some work to get running on  aircooled engine (water temp to oil temp for instance). But what are the chances of finding a speedometer that matches all of your other gauges!

I don't want much, but I would like these to end up in a nice looker, it would suit both very fine.

Some engine spruce up kit. A pair of Race Trim valve covers with holes drilled for breathing.

SOLD!

A Scintilla Magneto, completely waterproof as if that matters.

Come wind or snow, this one will never die on you. And trust me, it is cheap if you want it.

DDS oil pump cover, very light scoring on the inside, but nothing that could not be sanded out on a glas plate with cutting paste.

50 euros

Hi

Do you know what it will cost to send the copper Hurst to Norway ?

regards Olav

And a very, very nice one to cap it of for today, a Lang Breather Box. Very nice condition.

SOLD and SENT!

And don't forget, my 66 Street&Strip car is also for sale, good deal to be made there!  ;D

http://cal-look.no/lounge/index.php/topic,18258.msg261159.html#msg261159 (http://cal-look.no/lounge/index.php/topic,18258.msg261159.html#msg261159)

Hey Olav, I'm guessing here that the shifter would weigh in at less than 1kg, if so, according to the website of the Belgian post, it would cost 12,5 Euro (if it would be up to 2kg, the price would double to 25 Euro). Norway is rest of Europe in the below link.

http://www.bpost.be/site/nl/residential/parcels/international/kilopoststand.html (http://www.bpost.be/site/nl/residential/parcels/international/kilopoststand.html)

So the worst case it will be 185 euro's.
Ok, then I want too buy it.

Do you send me the paymentdetails on pm ?

I would like to purchase the LANG breather box.  Please PM my your pay pal address with shipping to Irvine, CA 92620 in dollars please.
Thanks
Troy Palmer

Payment sent for the LANG breather box.
Thanks
Troy

First item is in the mail, others waiting to be shipped in the course of the week!

Get the part you always wanted while they are hot  8)

2 more boxes are on their way to the hopefully happy new owners!

Let me know now if you want something as tomorrow it might be gone.

Page 3 is too far down, there is still soe nice stuff left I can't believe no-one has picked up!

Ok, since you all are a bit shy to get haggling, I made some changes to the price setting of some nice parts. Remind you, some of the stuff is really a rare find! So this is the time to get it on your car or engine.

love the gauges, if only i'd have a project for them!
someone should get them and decorate and old school dashboard with those!!

I'm a bit suprised by the dwindling amount of interest too, there's some nice stuff up there! And prices are not too crazy either.

crisis tim crisis  :-\

UP --> --> -->

Did you get my pm about the 356 wheels?

Hey Roland, yes I did, I will be taking some extra pictures this evening, any special requests? I could model them if you want   :-*

Haha, thanks but no thanks!

I'll just get some close-ups. Of the wheels, obviously! ;)

Roland just made me an offer on the wheels. I'm sure he'll confirm I'm not that bad to deal with  ;D

Make me some offers (on the stuff that is not underpriced already!)

So here is some extra stuff I dug out of hiding.

One is a 010 distributor / ignition in very good but dusty condition. Complete with dustcap and wires if wanted. It comes of a pretty much unused industrial engine so is also pretty much unused.

And of course the engine itself is also for sale. It is nothing but a 1200, but it does have the carter with dual oilspring thingies, so perfect for building that big engine from.

BOTH are SOLD!

is that engine running?  is it the one you drove before the 2276?  I might be interested...

Ok, this one definitely needs an up and crazy offers. To get you started I changed some of the prices. Some good, good deals to be made!

Hello Wünderwolff,

PM sent.

Some parts pending now.

Get the rest while they last!

This could do with an up, still some stuff left!

Oh and Roland, if you read this, there is a set of paid for 356 wheels sitting in my garage waiting to be used on whatever cool car you have in the works.  ;)

And up! Not too much left and some of it is HOT!

Oh, and Roland, I have a set of wheels waiting for you! I will be in Bruxelles on december 16th, come watch Roller Derby and leave with a nice set of 365 chromies.

still for sale?? .. I am interested ... this is my mail
giannessi77@yahoo.it
TNX!!! ;)

So, as Santa is short on cash, I offered to help him out and do some discount on my stuff. If you needed a nice set of wheels (matching trailer maybe?) or some dials to keep track of your engine, now is the time!

Really, no one?

You want me to start giving stuff away?

Good evening Wünderwolff  :),

You have a PM  ;)

All the best,
Martin ;D.

So, still up for grabs is:

- A nice set of Empi wheels
- a scintilla magneto
- a set of Stewart Warner gauges

And, perhaps, a suicide door fiat 600 to match the wheels? How sweet a deal would that be?  ;D

Good afternoon Tim,

You have another PM.  ;D

:)
Martin.

Final up before the remainders of my Fiat 600 project end up in the scrap metal heaps in the port og Ghent  ;D

Bid crazy, bid high, most of all, just bid!

Good afternoon Tim,

Have you still got the oil pump cover I have been asking about since last year?

???
Martin.

Sorry Martin, has gone to one of the Wunder Waffe as a gift   :-[

:(
Martin.

Could be interested in the eight spoke caps

Pm me with a crazy price  ;D

how much for the mag?

Sorry, the Magneto is most probably taken. You're first on the list if not.

Since no-one seems interested, really, let's make some proposals myself:

Magneto: probably sold
Stewart Warner gauges: 125 Euro (complete with rare speedometer!)
8 Empi Wheels and 4 centercaps:  800 Euro (and trust me, this is dirt cheap!)

And by the way, go ahead and buy a matching Fiat 600, ready to be chopped up and raced. See my other add, but if you combine the fiat, gauges and wheels, you owe me just 3000 Euro's. Best deal ever!

Must go!

Just 600 Euro for the wheels and centercaps. Or full price of 300 for the centercaps and just 300 for the 8 wheels if that sounds better!

100 Euro for the SW gauges

Hi interested in a pair of 14inch  rims if you would split its a killer deal for all 8 just with 7 already the girlfriend would kill me. If you are prepared to sell just two what price would you be looking at shipped to the UK please.? Cheers Alex