Title: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: kormi on May 24, 2012, 12:10:53 pm 2387cc Type 1 motor.
86mm CB crank, wedgemate with Stage II og sinter clutch. 94mm Wiseco pistons. Welded case with deepsump. Mahle cyl. CB044 welded and ported by JPM, Sweden. JPM/Oteva valvesprings. 52mm Gene Berg carbs with CSP-Bellcrank. 1:4 Pauter rockers. Manton pushrods. FK 89 cam. 12.4 compression. A1 1-3/4" cheramic exhaust with stingerpipe. Full MSD 6 Digital ignition and distributor with 2-step. Summit fuelpump + regulator and fuel-lines/AN-fittings from regulator to carbs. No fan shroud. Dynoed 234 hk/285 nm on pumpgas (95). Runs on E85 at the moment. This is the engine from Jørans Berserk-racer for those who know it. Best ET so far 11,1@1/4mile. Located in Jessheim/Gardermoen(SCC), Norway. Can be shipped on your expense. Will post a few pic this weekend. EUR 8.000 / NOK 60.000 (any bids?) http://www.youtube.com/watch?feature=player_embedded&v=y2Mfm6vPF8s Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: JS on May 25, 2012, 18:44:37 pm Having crewed for the BERSERK car for a couple of seasons, I can really vouch for this engine, top parts and workmanship. The heads are a work of art!
The many low 11sec runs in a heavy all steel car also suggests there´s more power in it now tuned on E85 IMHO. Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: kormi on May 28, 2012, 13:29:24 pm Thank you for nice words, JS.
Engine is still looking for a new owner.. Here's some cellphone pics. Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: kormi on May 28, 2012, 13:39:37 pm ....
Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: kormi on June 02, 2012, 17:55:27 pm Open for bids..
Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: leec on June 02, 2012, 18:41:11 pm Hi,
Couple of questions. What head studs are you using and what 'pump' fuel were you using with 12.5:1 compression ratio? Lee Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: kormi on June 12, 2012, 15:40:58 pm Hi,
headstuds are 8mm chrommoly. Fuel at that time, 95 octane. Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: kormi on June 18, 2012, 10:59:59 am Bump! :)
Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: kormi on June 26, 2012, 13:31:36 pm Bump! :)
Title: Re: Turn-key Type 1, 2387cc, 52mm Berg, MSD. Post by: kormi on July 05, 2012, 09:46:46 am Sold
|