|
Title: merged header and 1 3/8" dual quiets... Post by: Tom G. on June 13, 2007, 19:43:08 pm Hi,
Does someone knows, if the Dual Quiets in 1 3/8" fits with 1 1/2" merged header from Bugpack? Does the muffler stick out to much or is it ok? Perhaps someone has a photo .... Bye Tom Title: Re: merged header and 1 3/8" dual quiets... Post by: Diederick/DVK on June 13, 2007, 20:34:47 pm Well, this is what the merged bugpack set looks like:
(http://img230.imageshack.us/img230/9734/pict0001fo0.jpg) But the normal 1 3/8 dual QPs don't have the curve in it, so my guess is they will stick big time. But then, I don't even know how this is gonna fit my own '67 :D ;) Title: Re: merged header and 1 3/8" dual quiets... Post by: Shubee2 (DSK) on June 13, 2007, 20:38:58 pm should look like this
Title: Re: merged header and 1 3/8" dual quiets... Post by: Diederick/DVK on June 13, 2007, 20:40:20 pm ;)
check my thread again but yeah you need the bend in the dual QPs to fit a merged header i think. Title: Re: merged header and 1 3/8" dual quiets... Post by: Shubee2 (DSK) on June 13, 2007, 20:56:36 pm the mufflers you have are for a merge same as the ones on my car
Title: Re: merged header and 1 3/8" dual quiets... Post by: Tom G. on June 13, 2007, 21:28:24 pm Hi,
but what I have seen, is that the 1 1/2" merged header is building very short... But ok i have to look in detail.... regards Tom Title: Re: merged header and 1 3/8" dual quiets... Post by: Shubee2 (DSK) on June 13, 2007, 21:45:24 pm Hi, Tom If your using a Merge header and Standard QP's the mufflers will stick way out you need the Qp's with the two big hoops like in the pictureDoes someone knows, if the Dual Quiets in 1 3/8" fits with 1 1/2" merged header from Bugpack? Does the muffler stick out to much or is it ok? Perhaps someone has a photo .... Bye Tom Title: Re: merged header and 1 3/8" dual quiets... Post by: Gary Justus on June 13, 2007, 22:54:14 pm I believe the "collector" on the 1 3/8s extractor sits back too far. If you try to bolt up merged cans, they will hit the 2 and 4 tubes. If you try to bolt a non-merged dual can set-up to a merged header you will end up with a big, black (funny looking) propeller hangin' out the back.
|