|
Title: 2275 race/street engine Post by: volkmaster on July 02, 2012, 15:30:42 pm [attachment=1]Engine was built by JayCee 2008.
Case: CB mag with following modifications: JayCee bypass oil system, sleeved lifter bores, cut for sandseal and flanged crank and center flanged bearing. Oilreturns from heads to case. ARP 10mm cylinderhead bolts. Crank: Flanged Bugpack 82mm w T4 center main and chevy rod journals. Rods: 5,5" CB H-beam super race w ARP bolts. Cylinders: JayCee Pistons and rings: Venolia/Dykes Cam and lifters: Engle FK89 w CB straight cut gears, CB 2pc racing lifters, Pauter pushrods. Heads: Comp Eliminator w 46x38 stainless valves, port and polish by JayCee,. K800 springs, titanium retainers, CB 1,4 rockers and valve covers. Fresh valvejob and intake liners. Carbs: JayCee IDA 51,5 carbs with all the tricks. JPM venturis 44mm, CB intakes and linkage. Clutch: Kennedy stage1 and Blackmagic disc. More: MSD distributor and wires, old but working MSD 7a with adjustable timing control and MSD blaster coil , 1-3/4 headers and coated stinger, 30mm oilpump, CB billet alu oil pump cover, JayCee oil bypass filter, CB deep oilsump. Polished aluminium crankcase breatherbox. Geers triggerbracket -MSD sensor is included. Can be included for a turn key package: Holley Blue fuelpump w regulator, dual fuel pressure gauges and steel braided fuelhoses. Full cool-kit with polished aluminium fan housing/cylinder tins, polished generator w billet pulley and chromed stand. Has about 50 passes and 20 dyno pulls. Was recently taken apart and checked. Has 12.5 Cr and runs fine on Shell V-Power. On dyno 7 weeks ago: 226 hp @ 6900 rpm. Can mail dyno curves if desired. Building new engine as the new car has a gearbox with gears for 300+ hp… Complete engine: 5200 (46000 skr) Euro Fuel kit: 300 Euro (2500 skr) Cool-kit: 250 Euro (2000 skr) Can be seen at BRC at Tierp Arena 3/8 and if deposit is paid I can take it to SCC at Gardermoen 21-23/8. At Tierp it ran 11.71 -183km/h without launch in a stock weight car with a 002-box geared way too high. Put this in a lighter car with a tight sving-gearbox and you will do pretty low 11-sec runs. Thanks for looking. /Volkmaster Title: Re: 2275 race/street engine Post by: volkmaster on August 01, 2012, 14:10:18 pm Updated and pic![attachment=1]
Title: Re: 2275 race/street engine Post by: volkmaster on August 07, 2012, 14:45:23 pm Now with timeslip and a link to nice pics from BugRun Classic 2012.
www.RubNScrape.com |