The Cal-look Lounge

Cal-look/High Performance => Cal-look => Topic started by: Peter on July 20, 2012, 22:11:55 pm



Title: scintilla info
Post by: Peter on July 20, 2012, 22:11:55 pm
Hello,
can somebody tell me how to open up a magneto?
it's difficult :)
i want to try and lock it myself..
i know the weights are in the base, so is it enough to remove the bottom (part that goes into the dizzy drive shaft)
or do you have to dissassemble completely?
they sell a locking plate for vertex mags, can i use it you think?
thanks, Peter


Title: Re: scintilla info
Post by: Fastbrit on July 20, 2012, 22:45:39 pm
The bottom is separate from the main body, so you can simply remove the base OK. Scintilla = Vertex... ;)


Title: Re: scintilla info
Post by: Peter on July 21, 2012, 10:11:19 am
thanks Keith!!


Title: Re: scintilla info
Post by: hotrodsurplus on July 24, 2012, 07:48:17 am
It helps to have the special nut driver to work on a Scintilla but you can make one by filing the end of a piece of thin-wall tubing. You can use that same tool for installing/removing your dash escutcheons if you're careful.

And in case you need lock-out plates, here goes.
http://www.speedwaymotors.com/Vertex-Fixed-Plate-Assembly,29675.html (http://www.speedwaymotors.com/Vertex-Fixed-Plate-Assembly,29675.html)


Title: Re: scintilla info
Post by: Peter on August 21, 2012, 22:46:21 pm
ordered today ;) the manual as well
thanks again!


Title: Re: scintilla info
Post by: JS on August 22, 2012, 20:53:05 pm
The bottom is separate from the main body, so you can simply remove the base OK. Scintilla = Vertex... ;)

While we're on the subject, is Scintilla the make and Vertex the "model"? I always thought so, but maybe someone knows for sure?