The Cal-look Lounge

rollcage Ron lumus Racing,

engine 2442 cc 260 cv, terminator 62,cylinder heads autocraft with 50 X 44 ,

shifter JCL,

Price: 21000,00 €

For more: olddreamcar@yahoo.fr

Car weight : 550 Kg

Thanks : Laurent
(http://img805.imageshack.us/img805/3810/19614642528252860191263.jpg) (http://imageshack.us/photo/my-images/805/19614642528252860191263.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
(http://img814.imageshack.us/img814/5610/45639210151765232030436.jpg) (http://imageshack.us/photo/my-images/814/45639210151765232030436.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
(http://img23.imageshack.us/img23/4118/19380710150132980853421.jpg) (http://imageshack.us/photo/my-images/23/19380710150132980853421.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
(http://img62.imageshack.us/img62/8894/22392637947836877951111.jpg) (http://imageshack.us/photo/my-images/62/22392637947836877951111.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

new and last price 20000,00 €

More info,

The powerplant in this Pro Stocker is a stout 2442 cc based on the type 1 VW configuration.
The center of attention in this engine is a Bugpack88mm flanged cranked with 411 main bearing that is connected to a set
of Pauter 5.700-inch Chevy rods and 94mm Wiseco pistons inside Century cylinders.
Cam is a tried-and-true FK89 from Engle, and the rocker arm assemblies are 1.4:1 Pauters.
Pushrods are Gene Berg inside CSP tubes, while some of the other Berg goodies are straight-cut cam gears, 30mm full flow oil pump,
4-quart sump and lifters.
Ported and polished Performance Technology built heads house50mm intakes and 39mm exhaust valves, with K-motion valve spring and titanuim retainers.
Air and fuen distribution is handled by a set of Geers 62mm Terminator carbs with 50mm venturis bolted to a set of Auto-craft intake manifolds that have been heavily modified.
Engine was built with 13.5.1 compression
Distributor is also a GB product, a S4 stinger setups, but this one utilizes a JayCee crank trigger and MSD 7 AL box, coil, 2-step and rev-control to help set off the spark.

Type 1 gearbox with aluminuim JayCee spool
5-inch shorter SAW axles
32-inch ladder bars
Summit racing shocks
Bugpack 3-puck disc and Kennedy 2600 pound pressure plate
Rear braking is controlled by a set of Strange and Wilwood combo 4-piston brakes and stage breake.
Rear wheels are also Ercos, but with a set of Mickey Thompson 8.5-inch slicks

Nobody for a good dragster ready to roll.  ???

Possible without engine .


thanks Laurent

new new new price , 19000,00 €  :'(

Re Re up

without engine, 14000,00 €

hello, last price,

18000,000000000000000000000000000000000000 €€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€

17.000,00   :'(

SOLD