The Cal-look Lounge

bought this one from kelly park 2009 or 2010

[attachment=2]

picture's are a bit small but look like a good attempt till so far ....

CBs narrowed beam.

Ready for seats and (http://images.thesamba.com/vw/gallery/pix/966917.jpg)panels, etc

 :)

looking good man  ;D

why did u fill everything and leave the exhaust cutouts ???

btw color looks great I had a 56 looker the same color with berg 2017 hahahaaa

bless up,
Kiefer

Man i did not know why i did not cover those exhaust cutout, O well
Gotta a real Okrasa engine on the fence, all most done, The Abrath muffler set up will have to do for now, the holes will serve their purpose ASAP.

Got several builds at one time, I'm doing my best to be Funk
56 kombi at body shop, trying to pick a color is so challenging.
My Lambo Jarama Brakes including master cylinder clutch slave brake pistons etc, all have to be rebuilt from scratch $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ :o

At metal Craft Motorsport            ;D

no bumpers hole ??? this one is going to have buggys bars ???
by the way nice convert

Now that what I call a Green, in your face. ;D

Very nice car,love the color  :)

yep no buggy bars          thanks for the nice comments everyone          back to work.

Nice convertible.....droolllllll....

Love the color and wheel combo!  8)

Lambo countach green? (early series)  ???

In regards to the color green just walked up to a color chart and picked it, almost went with dap green.

got steering wheel and steering column back from Bob Koch
wrong year for 60Kab but I like the way it looks

gas tank painted and working on wire loom

 ;D

Vintage ponies

Hey Outlaw! Me thinks you need a proper IDA motor for that "looker"!!

I agree,  4year build on that money pit (okrasa) 
but I got plans for the spring.   

Lookin' GOOD!
Just wondering . . . what did Scott do for ya?

the separation of the body from pan,     some welding       tranny work                Bryan helped with the narrowed beam & brakes                  also the body back on pan     
soon the engine and wiring           trying to get the car over to Carlos to lay carpet and panels on Saturday.         

beautiful looking engine, love the hard fuel lines and the bypass filter does it T off the pressure switch and go back to the case via a restriction to the bolt that holds in the dizzy clap that is hollowed out?

  ;D

Same for me!


I agree . . . lots of cool details. All the best in getting over for the interior. Keep us posted, and again, nice work!

Italian OUTLAW              Stopped in to check on progress, Master cylinder rebuilt, slave rebuilt, pistons for caliper's rebuilt, new bearings, etc etc           I'm going drive this car soon.  I want to go fast

This is a photo of the engine on my Lambo after working on it and getting it to turn over it was so rewarding, I'm not able to put into words.

I want a ride in both of them Ted.

sure you got it.

 :D

 :o

Looks good Ted. But what`s with the tires? And i still think it needs Porsche nipple caps.

thanks,      had MH tires in storage cost 40 bucks to mount,  never been used          I was not happy with the rear tires some old worn Pirelli's         just to roll the car around for a few more weeks. 

picked these up yesterday. NOS

 :o

 ;D

Hood attached

gasket for deck lid in.

 ;D

This one only needs the proper tires they  should been in this week, then I can start back up on my 56 euro Kombi, hope you folks like our vert and if you don't that's ok it was just an attempt.

looks amazing , stable mates are not too shabby either ;)

 ;D thanks amigo        stayed tuned for audio

I think the green vert looks great -- but I'd be really careful because what ever it has its spreading to the grey car

 ;D tires in

What do you folks think of the stance?

Nice  8)

Looks really good!!!
The smooth front end is awesome!
Don't know if it's just me or maybe the camera angle, but . . . does your front wheel have too much camber?

Not sure had that gone over by a local mechanic, but I will have an expert look ay that before my Sacramento trip on September 1.
Taking the 58 big window and this vert to Bugarama, see you folks their.

Lookin good, Outlaw!
If it was me, I would put a taller tire up front to fill up the fender wells, like a 145. Then adjust the beam down a hair to get the ride height back in position.

what width rims do you use to fit these 8.5 tires?

8.5 tire went on the 5.5 rear wheel   


Zack I must buy more tires        :-\      maybe next month,   those front runners took about 2months to come in

Look at my new investment
58 Low Light :o

Very nice Kabriolet  :) :)

Right               thanks

I'll be lookin' for ya so I can see your bitchen cars and shake your hand!
Mark

You got Mr. Blitz, ill put the taco from left hand down  or the Heineken from my right hand down and gladly shake your hand pal, cya their.

Hey Mr. Speedwell, sir what do you know of these bad ass toys, 60 think 70thing or an 80thing?

Irwindale

also@show

 ;D almost ready for a drive

installing interior

Great choice Outlaw! LOL

front beam, spindles, 944 brakes all where taken down south to Old Speed should be ready aboot the middle of December.
Not sure if where going with a 3in or 4in on beam, putting 4.5 Fuchs up front.
Removed bulk head and added one 356 front seat only, looks neat I like it.
Bus at the painters, undecided on color.
Going to build a very stout engine, I wanna go first.

The Lamb is a lot of fun to work on it make me happy.

That looks great just as it is!

How about keeping it "flat silver" and putting something bright and shiny on just the roof?
It's low enough to see it easily.  ;D

its sitting on bricks, just shoved the wheel under for a photo.  old pic.   
I was considering coral red, have you ever seen an early bus painted coral red.

original interior from 1972 ;D

https://www.youtube.com/watch?feature=player_detailpage&v=a74VAjQ7zzE
Want to here some Italian music

My Lamb came with out seat mechanisms, and locating the original ones was fruitless. Did some research on other Italian cars and found that a car called Lancia and Fiat about the same year had very similar ones like the Jarama and those where out their so I quickly purchased what was available on the web, and with some modifications I was able to join my seats together.
Also located a fuse cover from a fiat. As far as my Bus goes January seems promising to have the rest of the body work complete will post some pictures then.
Also located my original tool and jack bag, took them over to my pal and had them re-popped, and started locating some original tools, I posted them on E=Bay with a small mark up.

Metal work being done, at the final steps getting before paint.
Getting ready to shock the fuck n world :o

Sorry I missed your call today dude, I was in class. I'll give you a ring this weekend.

Got a new horse for my stable ;D

Thats a fact Zack

You did good...

Thank you sir, I have several leads to more hard to find cars.
Also The Lambo came home today, you gotta try a V12     VVVVRRRRMMMM

cleaning up

Nice bus. I'm sure you're getting PM's, don't sell it.

removed some parts from the lil bus today

floors in 56 Kombi, gas tank getting the treatment, window frames out.
getting closer to paint

the clean up took several hours, ill hit it again here soon.
came in deluxe, going to put it in the 56

Made it to a local car show on Sunday, the 58 put several miles since restoration. The 55 was looking good.
Hung out for several hours then split, went home and brought out the 356 and went to the local skate park, wow now that was fun.