|
Title: What Ignition Leads Post by: leec on October 03, 2012, 14:00:53 pm Hi guys,
Giving my Race car a bit of a winter service... I run a 009 with petronix and am after recommendations on what leads to run. Would like the 90 degree ends to fit the 009 cap but not essential. The engine is 2276cc, 48ida's, FK87, 10.3:1, wedgeports etc etc Lee Title: Re: What Ignition Leads Post by: DaveN on October 03, 2012, 16:04:52 pm pink neon ones with a clear dizzy cap, that will work
Title: Re: What Ignition Leads Post by: glenn on October 03, 2012, 17:32:24 pm Bosch 09004 are 7mm silicone with a copper core and 90° end.
Title: Re: What Ignition Leads Post by: leec on October 03, 2012, 18:32:04 pm Bosch 09004 are 7mm silicone with a copper core and 90° end. Thanks Glenn for a sensible suggestion :) Are these good for a performance motor? Seem hard to get in the Uk from a quick search... Lee Title: Re: What Ignition Leads Post by: glenn on October 03, 2012, 19:04:36 pm I have Bosch 09001, same except for straight ends, on my 2180.
Title: Re: What Ignition Leads Post by: Martin Greaves on October 03, 2012, 19:42:08 pm Hey Lee I think Dave got it right. :D
Title: Re: What Ignition Leads Post by: Jim Ratto on October 04, 2012, 03:55:23 am I use Beru Porsche 912 wires. Nice quality and cheaper than the 09001 Bosch now. Fit VW type 1 perfect.
Title: Re: What Ignition Leads Post by: andy198712 on October 05, 2012, 21:51:58 pm just be careful of the core material depending on your plug caps, the stock Vw dont fit with a solid core very well i found, well they didnt. i'm switching to a braided core so i can run the VW beru plug caps for cooling which screw into the wire.....
depends if your wanting crimp on or screw in plug caps :) |