The Cal-look Lounge

Cal-look/High Performance => Pure racing => Topic started by: Mirco Jufer on October 09, 2012, 20:15:10 pm



Title: Rear Racerims
Post by: Mirco Jufer on October 09, 2012, 20:15:10 pm
Hi all

I need a Set of New Rear Rims for my Drag Bug.
It must have 7 to 15 or 7.5 to 15 Inch. for Wide Five.
Offset 0mm or Backspace max 3.75 Inch.
My first Choice was e Set with star Cut like Centerline Convo Star.
Witch Manufacturer make this Dimension for Drag Racing Rims?
Thanks for Tips

Mirco


Title: Re: Rear Racerims
Post by: Mirco Jufer on October 11, 2012, 18:49:50 pm
No Options??

Please


Title: Re: Rear Racerims
Post by: richie on October 11, 2012, 20:47:14 pm
Hi all

I need a Set of New Rear Rims for my Drag Bug.
It must have 7 to 15 or 7.5 to 15 Inch. for Wide Five.
Offset 0mm or Backspace max 3.75 Inch.
My first Choice was e Set with star Cut like Centerline Convo Star.
Witch Manufacturer make this Dimension for Drag Racing Rims?
Thanks for Tips

Mirco


3 1/2 inch backspace is fairly common,but there is not much choice in wide 5 for racewheels, centerline and CMS/Erco are the main 2 that I can think of


cheers richie


Title: Re: Rear Racerims
Post by: Mirco Jufer on October 13, 2012, 07:40:25 am
Ok thanks Richie.
But where i can order the Centerline Convo star Rims?
I only found Pomonatirespro who have those Rims in the Catalog.
But they give me no Answer to my Mails.
Have you a good Shopadress to order and ship to Switzerland?

Thanks for help


Title: Re: Rear Racerims
Post by: ED2.4 on October 13, 2012, 10:16:57 am
CSP have them in stock(no star cut), 7"x15" and 86mm BS,but a little expensive
here too:
http://www.racereadyproducts.com/centerline-wheels/centerline-early-style-vw-wheel/


Title: Re: Rear Racerims
Post by: Roman on October 15, 2012, 09:16:09 am
It is at least 10 years since they made the Convo Pro with 5 x 205 as far as I know.


Title: Re: Rear Racerims
Post by: dannyboy on October 15, 2012, 09:20:20 am
prowagen had them listed a while back im sure?


Title: Re: Rear Racerims
Post by: Mirco Jufer on October 15, 2012, 19:26:36 pm
Ok thanks.
And where are the Erco star Cut in 7&15 Available?

Regards