|
Title: Empi Sending Units Post by: SlingShot on June 25, 2007, 05:01:38 am Hello everyone. I have for sale a reproduction Empi Sender. This is a very well produced unit, that has been molded from an original piece off of a true EMPI GTV BEETLE. The kit includes ALL the sending units and connectors to get your later model (ORANGE NEEDLE) oil temperature and oil pressure gages working properly. I have done a lot of testing on the oil temperature and oil pressure sending units, and found that the oil pressure gage reading is approximately 5 psi lower than actual, and the oil temperature is within + or -10 deg.
There were 2 styles of Empi Senders manufactured in the 60's and 70's. The most common, when installed would display the EMPI logo straight up and down in line with the crank pulley. The other model has the EMPI logo flipped, so it is common to install this sender perpendicular with the crank pulley. Both sender styles are available. I have posted pictures bellow. I will make NO MORE than 20 of these kits ! (http://i58.photobucket.com/albums/g265/racebug67/1.jpg) The top two are original, the bottom two are reproductions. The reproductions will varnish after they get warm on an engine. (http://i58.photobucket.com/albums/g265/racebug67/2.jpg) Top original, bottom reproduction. (http://i58.photobucket.com/albums/g265/racebug67/3.jpg) This is the common style. (http://i58.photobucket.com/albums/g265/racebug67/4.jpg) This is the perpedicular style NEW PRICES AS OF 01/01/09 $475.00 for a complete setup to work with your gauges. Prices per piece, Brass Empi Sender T - $430.00, Oil pressure sending unit $50.00, Oil Temp sending unit $20.00. Contact me and let me know what style you are interested in, and any questions you may have. Thanks, Chris Title: Re: Empi Sending Units Post by: empicolector on June 25, 2007, 08:45:29 am hye I am interested by a kit for orange needle let me know by PM
Title: Re: Empi Sending Units Post by: speedwell on June 25, 2007, 16:50:38 pm pm sent ;)
Title: Re: Empi Sending Units Post by: Shubee2 (DSK) on June 25, 2007, 17:33:17 pm How Much is just the Brass EMPI tee Fitting I have all the sending units and Gauges just missing the Brass fitting Let Me Know Thanks Shubee
Title: Re: Empi Sending Units Post by: SlingShot on June 25, 2007, 17:48:05 pm Brass Empi Sender T - $430.00
Oil pressure sending unit (orange needle) $55.00 Oil Temp sending unit (White or Orange needle) $25.00 Title: Re: Empi Sending Units Post by: Lids on June 25, 2007, 18:18:22 pm you have pm
Title: Re: Empi Sending Units Post by: SlingShot on March 23, 2008, 01:45:26 am Hello Everyone, I know it has been a while, but I have finally finished these up.... Just in time for Bug-In :) PM If you have any questions.
(http://i58.photobucket.com/albums/g265/racebug67/IMGP1815.jpg) Title: Re: Empi Sending Units Post by: Zach Gomulka on March 23, 2008, 06:45:47 am That is cute- you displayed them all pretty like :)
Which one is mine?? Title: Re: Empi Sending Units Post by: empicolector on March 23, 2008, 07:50:05 am PM SENT
THANKS Title: Re: Empi Sending Units Post by: Liou on March 23, 2008, 10:37:53 am pm sent
Title: Re: Empi Sending Units Post by: empicolector on March 23, 2008, 19:03:35 pm thanks ;D
Title: Re: Empi Sending Units Post by: SlingShot on March 23, 2008, 19:28:10 pm That is cute- you displayed them all pretty like :) Which one is mine?? The one on your car ;) Title: Re: Empi Sending Units Post by: SlingShot on March 23, 2008, 19:51:43 pm I hope this helps.
(http://i58.photobucket.com/albums/g265/racebug67/IMGP1291.jpg) Title: Re: Empi Sending Units Post by: Lids on April 02, 2015, 18:03:28 pm I know this is a very old thread, but does anybody know what the thread size is on the end that the oil temp sending unit fits into?
Title: Re: Empi Sending Units Post by: bugstar70 on April 03, 2015, 16:21:19 pm I like to buy just the sending units. Please let me know the total price including shipping to Germany. PayPal accepted I guess...
Thanks Fabian Title: Re: Empi Sending Units Post by: Tourist on April 13, 2015, 11:46:46 am I know this is a very old thread, but does anybody know what the thread size is on the end that the oil temp sending unit fits into? Good morning Mike, I think it might be M14 x 1.5, I'll try and remember to post the photo Slingshot sent me later which has the threads drawn on it 8) :) Martin. Title: Re: Empi Sending Units Post by: Lids on April 13, 2015, 16:28:38 pm I know this is a very old thread, but does anybody know what the thread size is on the end that the oil temp sending unit fits into? Good morning Mike, I think it might be M14 x 1.5, I'll try and remember to post the photo Slingshot sent me later which has the threads drawn on it 8) :) Martin. Martin, thanks for the reply. its actually M16 x 1.5. Title: Re: Empi Sending Units Post by: SlingShot on March 29, 2016, 19:39:41 pm I have a reproduction sender available. This is the last one I have. It was my prototype , it has some flaws. During testing I broke the threads. I have repaired it & it's ready to run.
Brass Empi Sender T - $430.00 Oil pressure sending unit (Orange needle) $55.00 Oil Temp sending unit (Orange needle) $25.00 Title: Re: Empi Sending Units Post by: speedwell on April 02, 2016, 11:52:37 am chris i've a friend interested , but he's not on the lounge , i'll tell you if he take it or not
Title: Re: Empi Sending Units Post by: speedwell on April 02, 2016, 12:18:54 pm ok , he don't take it ....next
Title: Re: Empi Sending Units Post by: vw68volman on July 05, 2017, 16:18:08 pm chris i've a friend interested , but he's not on the lounge , i'll tell you if he take it or not I have a 68 GTV convertible. I am in need of oil temp and oil pressure sending units that work with real EMPI gauges. What would recommend using?Title: Re: Empi Sending Units Post by: empicolector on January 03, 2018, 11:05:04 am Stil for sale ?
|