|
Title: Ballpark jetting for 44idf/2276 Post by: fastoldvw on November 23, 2012, 16:31:22 pm Hi, i just bought a used set of italian 44 idf's, and would like to ask the experts if the jetting in them is allright for initial start up..
They came with: 34mm venturis 4.5 sec. venturis .45 idle f11 emulsion tube 150 main air corr jet 130 main gas jet Engine is: 82x94 2276 oxyboxer, engle 120 cam stock rockers, 35X40 valves ported heads/manifolds , .. About 9:1 compression.. Rods are 5.6" long. Also would like to know of a good supplier of parts for these carbs.. one secondary venturi is a little damaged and i'd like to replace it.. Rune Title: Re: Ballpark jetting for 44idf/2276 Post by: benlawrence on November 23, 2012, 20:35:11 pm I ran a fairly similar spec , your idle jets i would start with 55's 160 main 180-200 air
|