|
Title: SFI 25.4 Specs? Post by: Andy Sweeney on January 04, 2013, 21:19:37 pm Anyone got the floor specs for SFI 25.4 please?
Title: Re: SFI 25.4 Specs? Post by: Jim Smith on January 06, 2013, 22:46:31 pm Give Any Robinson Race Cars a call, He will be able to sell you a full copy of the 25.4 regs for about £35. You will need a full set as the floor design changes dependent on how the rest of the chassis is being done.
Title: Re: SFI 25.4 Specs? Post by: Andy Sweeney on January 07, 2013, 00:44:00 am Give Any Robinson Race Cars a call, He will be able to sell you a full copy of the 25.4 regs for about £35. You will need a full set as the floor design changes dependent on how the rest of the chassis is being done. Thanks Jim, will do. Speaking with Mark Norton a while back and he said that full tube frame cars completed from 2013 onwards will need to have a floor spec to comply with 25.4, so whilst I'm still flexible on the floor, I wanted to get it right now to save re-doing stuff down the line. I found this on the net which gives a reasonable handle on the bar position for the floor on the centre left diagram, but it's always nice to touch and hold an original copy. (http://i83.photobucket.com/albums/j301/last_triumph/Race%20Car/SFI254.jpg) Title: Re: SFI 25.4 Specs? Post by: Ragtop on January 23, 2013, 17:45:08 pm There are three different ways of putting the FC cage and SFI then has three different drawings of that. Make sure you choose the one according to where your helmet will be to the main cage
|