The Cal-look Lounge

The Cal-look classifieds => For sale! => Topic started by: busgods on May 13, 2013, 08:29:31 am



Title: MS 230/4 cylinder heads SOLD
Post by: busgods on May 13, 2013, 08:29:31 am
JPM MS230/4 cylinder heads (for 101.6mm bore), New. Bare heads in 38x48mm sizing, combustion chamber 38.6cc. No valves, no springs, no retainers. - 1500e PENDING
5 bolt rocker shaft setup for Pauter 1.5:1 rockers availlable at 250e extra cost. (No, not available at this stage separately. Sorry.)

SOLD



Title: Re: NEW 88x101.6mm RACE long block parts
Post by: drgouk on May 13, 2013, 11:03:57 am
Hi, Interested in the jpm heads, are they 38cc chambers? they look bigger? Thanks.


Title: Re: NEW 88x101.6mm RACE long block parts
Post by: busgods on May 13, 2013, 12:46:01 pm
38.6cc, measured by a trusty machinist. I could double check that  if needed. I'm 99.9% sure that the measurement is correct. Surely the heads still need loads of prep work to make them really work, combustion chamber prep, intake and exhaust port work, valve prep etc.. In current condition they are a good starting point and quality valvetrain components can be picked up to suit whatever the combo in mind.


Title: Re: NEW 88x101.6mm RACE long block parts
Post by: Jesse Wens on May 14, 2013, 19:56:02 pm
can you explain how you were going to do the mounting of the pump to the camshaft?


Title: Re: NEW 88x101.6mm RACE long block parts
Post by: busgods on May 15, 2013, 07:49:13 am
Add modified. Less parts, less complicated. ;)


Title: Re: MS 230/4 cylinder heads, 88mm flange crank, rods
Post by: busgods on May 27, 2013, 12:41:03 pm
Parts still for sale. Heads would make a great street choice after a combustion chamber prep. Quesstimate on the head CC should be somewhere around 40-45cc after prep which should suite ethanol use no problem with a suitable cam etc...


Title: Re: MS 230/4 cylinder heads
Post by: busgods on June 24, 2013, 11:01:06 am
Heads can be delivered to EBI if you let me know early enough... ;) Before friday I would say. :D


Title: Re: MS 230/4 cylinder heads
Post by: busgods on August 01, 2013, 10:02:05 am
Heads can be seen in classic this weekend!  8)


Title: Re: MS 230/4 cylinder heads
Post by: busgods on August 28, 2013, 09:57:46 am
Final reductions...


Title: Re: MS 230/4 cylinder heads
Post by: UltraOrange67-2443 on October 08, 2013, 22:09:17 pm
PM sent


Title: Re: MS 230/4 cylinder heads
Post by: busgods on November 28, 2013, 14:08:15 pm
Plenty of interest. No buyer yet...

Thanks.


Title: Re: MS 230/4 cylinder heads
Post by: busgods on January 07, 2014, 11:53:53 am
Hedddsssss...


Title: Re: MS 230/4 cylinder heads
Post by: busgods on March 13, 2014, 12:02:44 pm
Can arrange them prepped for your specs with springs, valves and portwork for approx 1000e depending on the parts needed...


Title: Re: MS 230/4 cylinder heads
Post by: busgods on April 22, 2014, 13:10:14 pm
Combo deal now for heads and rocker shafts 2000e


Title: Re: MS 230/4 cylinder heads SUMMER DEAL!
Post by: busgods on June 04, 2014, 13:31:57 pm
Summer deal!!!


Title: Re: MS 230/4 cylinder heads SUMMER DEAL!
Post by: busgods on July 27, 2014, 13:18:09 pm
These still available. Delivery to Tierp or SCC possible.  :)


Title: Re: MS 230/4 cylinder heads
Post by: busgods on January 16, 2015, 14:26:20 pm
Got Dell West Chevy size Ti retainers and locks to go with these if needed. No extra cost...


Title: Re: MS 230/4 cylinder heads
Post by: busgods on April 07, 2015, 06:53:19 am
Heads still available, dollar to euro very strong...


Title: Re: MS 230/4 cylinder heads
Post by: busgods on August 03, 2015, 11:06:09 am
Still on the shelve...