|
Title: Fibreglass pre-67 rear valance Post by: Neil Davies on May 31, 2013, 23:47:21 pm Evening, Clearing some more bits out and found a fibreglass valance. Probably not really suitable for an out and out street car, but for a street/race car using Dzus fasteners it would be ideal. I'd use it myself on my new car but it's for pre-'67. I'll get some pictures this weekend.
Looking for £35. Title: Re: Fibreglass pre-67 rear valance Post by: Ninho/DKM on June 01, 2013, 15:22:29 pm I could be interested, waiting for pictures. thanks.
Title: Re: Fibreglass pre-67 rear valance Post by: Neil Davies on June 03, 2013, 22:57:39 pm Ok, pictures!
It's quite well covered in overspray - looks like the yellow is filler-primer, and the red is overspray - so it will need rubbing down well. [attachment=1] The back of the valance shows the little bit of repair work where I think it had a quick release pin fitted. You can also see the cut outs where the wing bolts fit. [attachment=2] The bottom view shows where the return lip has been trimmed away - looks like it was for stock pea shooter exhausts, and where one side has been cut down - not sure why! [attachment=3] Hope these are ok, let me know! |